Personalize; Usb 3.0 - Dell FPM185 User Manual

take several hours. You can safely stop the LCD Conditioning by turning the
monitor off.
NOTE: The LCD Conditioning feature does not remove burn-in.
Factory Reset
Resets all OSD settings to the factory default.

Personalize

There are three shortcut keys on the front panel of the monitor. From the
Personalize menu, you can assign a control menu to a shortcut key for quick
access.

USB 3.0

This device has two USB 3.0 compliant pass-through ports, which provide faster
data transmission between your console and connected USB devices. However, if
you are using USB 1.1 or 2.0 targets, the maximum speed will be limited to
those devices' thresholds. See the following table.
Table 3.6: USB Maximum Speed Chart
Device/Target USB 1.1 Target
USB 1.1 12 megabits per
Device second
USB 2.0 12 megabits per
Device second
USB 3.0 12 megabits per
Device second
NOTE: The device is limited to 900 mA with a USB 3.0 target and 500 mA with a USB 2.0
target.
USB 2.0 Target
12 megabits per
second
480 megabits per
second
480 megabits per
second
Operating the Console Tray
USB 3.0 Target
12 megabits per
second
480 megabits per
second
4.8 gigabits per
second
xxx | xxx
18