Pro Bike Tool Indoor Bike Rack – 6 Bikes Installation Instructions Manual

Hide thumbs

Table Of Contents

Table of Contents

Quick Links

Download this manual

Tools Required

Drill

Drill bit 8mm (0.3 in)

Hammer

IMPORTANT - INSTALLATION

Please adhere to the below instructions to ensure warranty is not void.

Use correct bolts or screws, expansion anchors, electric tools and drill tool bits for installation.

DO NOT install the bike wall racks on unsupported wall surfaces e.g. plasterboard wall unless there is a strong

wooden stud behind it.

ONLY install the bike wall racks on a solid stud, masonry or concrete wall. The bike wall racks are designed for use

a. Aluminium Rail x 2

b. Hook Cap-Upper x 6

c. Hook Cap-Lower x 6

d. Hooks x 6

e. Hook Bolt x 6

f. Extension Bolt x 4

g. Side Caps x 4

h. Slot Washer x 4

i. Cross Cap x 1 (use for extended rails only)

j. Drills and Hooks Position Paper x 2

k. Allen Key x 1

l. Wood Screw x 8

m. Socket Wrench x 1

n. Adaptor x 2

Table of Contents

Need help?

Do you have a question about the Indoor Bike Rack – 6 Bikes and is the answer not in the manual?

Questions and answers

Summary of Contents for Pro Bike Tool Indoor Bike Rack – 6 Bikes

Page 1 a. Aluminium Rail x 2 Tools Required b. Hook Cap-Upper x 6 c. Hook Cap-Lower x 6 Drill d. Hooks x 6 Drill bit 8mm (0.3 in) e. Hook Bolt x 6 Hammer f. Extension Bolt x 4 g. Side Caps x 4 h.
Page 2 on a wall structure in good condition which is suitably robust to carry the weight of the bikes to be hung on it. It is your responsibility to ensure the racks are installed on a suitable surface. ONLY use correct wall xings and anchors appropriate for the type of wall.
Page 3 1. Assemble hooks as per diagram. 2. Slide hooks into Aluminium Rail. 3. Position hooks in rail either using guide positioning as per positioning sheets (j) (please ip one sheet over and place side by side, as per diagram) or according to individual spacing preference.
Page 4 1. Insert the Adaptors (n) into one Aluminium Rail (a) as per diagram. 2. Attach the Aluminium Rail with Adaptors onto the wall. Make sure the holes are on the drill marks, then loosely screw in the 4 (No. I - IV) wood screws ( l ) as per diagram. 3.
Page 5 Following positioning of hooks in rail. 1. Flip over hook cover and then use Allen Key (k) to tighten hook bolts. 2. Once secured, ip back hook cover. 3. Push in hook covers into rail. 4. For both ends, insert the side caps (g) into the ends of the Aluminium Rails. 5.
Page 6 B. Masonry / Concrete Wall Attach and make level the Drills and Hooks Position Papers ( j ) on wall. Mark the drill holes on wall at both ends and middle as per diagram.
Page 7 1. Knock extension bolts into holes in wall. 2. Use socket wrench (m) to unscrew nuts (counter clockwise). 3. Remove the hardware (washers and nuts). 1. Mount Aluminium Rails on the extension bolts. 2. Slide in and position slot washers (h) into ends. 3.
Page 8 Join our VIP Club to receive coupon deals and information on our new products Follow Us! To keep up to date with all the latest products, news and awesome deals from PRO BIKE TOOL, sign up for our newsletter at probiketool.com, or follow us at:...