Primrose Drop Arm Awning Instructions Manual

Contents
Contents
Wall bracket Bracket plate
(Linkers)
Primrose Awnings Installation Instructions
Primrose Awnings - Drop Arm Awning Instructions
1.0m - 3.0m Awnings
8 x Expansion bolts (2 per bracket)**
2 x Wall brackets
2 x Bracket plates (Linkers)
1 x Awning
1 x Winder handle
Fixing kit
Bolts M6
Bolts M8
Expansion tubes
Self tap bolts ST6
Suggested Tools
- Hammer drill
- 10mm masonry drill bit
- Chalk or pencil to mark
- Laser level or long spirit level
- Metric socket spanner set
- Adjustable spanner
- Screwdriver
Warning
We recommend that two or more people are
required to lift the awning into place.
The awning and frame may be supplied with a
plastic wrapper. This should be removed prior
to use.
Plastic bags can be dangerous to children and
babies. Keep out of the reach of babies and
children to avoid the risk of suffocation.
Before assembly, check that all parts are
contained within the box. If any parts are found
to be damaged or missing, please telephone
our customer service hotline:
0870 499 0220
www.primrose-awnings.co.uk
**The expansion bolts supplied are for
reinforced concrete or brick walls.
The awnings may be installed on wooden walls
if the wall is sufficiently strong. Use appropriate
screw-threaded or coach bolts.
1