Summary of Contents for Coastal MYGIG LOCKPICK PRO
Page 1
AFTERMARKET RIGHT CAMERA VIDEO CONNECT HERE OPTIONAL POWER OUTPUTS MYGIG LOCKPICK PRO ADAPTER DO NOT CONNECT TO VEHICLE WIRING RIGHT POWER TO LOCKPICK RED W/BLACK STRIPE WIRE STANDARD INSTALLATION TO LOCKPICK BLACK GROUND WIRE COPYRIGHT 2015 COASTAL ELECTRONIC TECHNOLOGIES, INC.
Page 2
Please read this manual fully so that you can learn to take advantage of all of the exciting features and capabilities of the new LOCKPICK PRO. At this time, Coastal Electronic Technologies, Inc. would like to recommend that you have this installation completed by a certified mechanic or someone familiar with automotive electronics. This installation, while not time consuming, does require careful attention to detail and precise following of installation instructions.
Page 3
OK, let’s get started. On your MYGIG LOCKPICK PRO ADAPTER control box are switch settings which allow you to program the Lockpick for your vehicle and the features you would like to enable. The diagrams below are important to enable the PRO module to work with MYGIG radio systems.
Page 4
IMPORTANT IMPORTANT IMPORTANT IMPORTANT LOC LOCK K K K PICK PICK PICK PICK PROGRAMMING SETTINGS PROGRAMMING SETTINGS PROGRAMMING SETTINGS PROGRAMMING SETTINGS All vehicles applications compatible with the Lockpick PRO Adapter use low speed communications, however there are two speeds of MYGIG radios; low speed and high speed. The Mygig adapter can allow the use of either high or low speed radios to be used as a replacement for your installation.
Page 5
The MYGIG LOCKPICK PRO ADAPTER is designed with a simple “T” harness connector, equipped with factory male and female connectors for converting the present system to the new one. Also, an FM antenna adapter cable included to allow your older style antenna to plug into the new Mygig radio.
Page 6
On the back of a MYGIG radio may be additional connectors. If your MYGIG radio is navigation equipped, there will be a BLUE connection for the GPS antenna. A GPS antenna is necessary for navigation equipped MYGIG radios to provide map and route guidance. If you did not receive one with your new radio, they are available at your local Chrysler/Dodge/Jeep dealer or online from several sources.
Page 7
If you want to add a front camera or side cameras to your vehicle, the Lockpick is prewired and programmed for exciting options. The Lockpick harness has a 12V power output labeled ADDITIONAL CAM POWER 12V+ that is specially designed to automatically provide the power needs of your front and side cameras.
Page 8
MYGIG LOCKPICK ADAPTER OPERATION INSTRUCTIONS The MYGIG LOCKPICK PRO automatically activates the TV mode and generates up to 4 pages of touch screen options for simple user control. Touch the on-screen button to select the desired function. **Mygig radio buttons and locations may vary with year and options present.
Page 9
LOCKPICK PRO ADAPTER Options Page 3 1. Touch CHANGE OPT to turn ON or OFF the feature selected below it. 2. Select AUTO TURN to automatically view a side camera when the corresponding turn signal is activated. Page 1 menus will change to allow manual left/right camera selections.
Page 10
Within the the MYGIG LOCKPICK ADAPTER options, the user can add the VES rear entertainment mode to any MYGIG radio. Video and audio INPUTS are provided on the Lockpick ADAPTER harness which can allow aftermarket multimedia systems (iPod/iPhone, DVD, Satellite, Streaming, etc.) to display their video on the MYGIG system screen and have the audio play through the factory sound system WITHOUT FM modulators.
Page 11
MYGIG radio for the front seat operator. Thank you for your trust in Coastal Electronic Technologies, Inc.
Page 12
Installation Q & A: I installed the new MYGIG and Lockpick but my radio does not turn on. Check programming switches 1, 2, 3, 4 and 5 on the interface and correctly set them Up or Down as described in the Lockpick programming section of this instruction set. Make sure that you have correctly identified if the MYGIG radio is a low or high speed type.
Page 13
in the passenger kickpanel area and easily reached through the glove box) to avoid your phone pairing with 2 systems or conflicting Uconnect text on your EVIC display if equipped. If your MYGIG is a non navigation version, your dealer has a MYGIG Uconnect accessory kit available that can be added to create the voice recognition and Bluetooth phone functions present in the navigation MYGIGs.
Page 14
12V POWER OUTPUT RIGHT POWER TO LOCKPICK RED W/BLACK STRIPE WIRE OPTIONAL POWER OUTPUTS TO LOCKPICK BLACK GROUND WIRE MYGIG LOCKPICK PRO ADAPTER DO NOT CONNECT TO VEHICLE WIRING FRONT, REAR, LEFT, RIGHT CAMERAS COPYRIGHT 2015 COASTAL ELECTRONIC TECHNOLOGIES, INC.
Page 15
MYGIG RADIO TEMPLATE CUT OUT AND USE AS A GUIDE FOR TRIMMING THE FACTORY BEZEL...
Need help?
Do you have a question about the MYGIG LOCKPICK PRO and is the answer not in the manual?
Questions and answers