Related Manuals for iRobot Roomba e6
Summary of Contents for iRobot Roomba e6
- Page 1 Robot Vacuum Aspirateur robot Robot aspirador Robot aspirapolvere Saugroboter Р Owner’s Guide Guide du propriétaire Guía del propietario Guida utente Bedienungsanleitung Руководство пользователя...
-
Page 2: Important Safety Information
Safety Information Important Safety Information This owner’s guide includes information for Regulatory Model: RVC-Y1. SAVE THESE INSTRUCTIONS WARNING: When using an electrical appliance, basic precautions should always be followed, including the following: READ ALL INSTRUCTIONS WARNING: To reduce the risk of injury or damage, read and follow the safety precautions when setting up, using, and maintaining your robot. - Page 3 CAUTION WARNING: Indicates a hazardous situation that, if not avoided, could result in death or serious injury. • Be aware that the robot moves on its own. Take care when CAUTION: Indicates a hazardous situation that, if not avoided, could walking in the area that the robot is operating in to avoid result in minor or moderate injury.
- Page 4 BATTERY disposal. WARNING • For best results, only use the iRobot lithium ion battery that comes with the robot. • Do not open, crush, heat above 176° F: 80° C, or incinerate. • Do not use non-rechargeable batteries. Use only the Follow manufacturer’s instructions.
- Page 5 This symbol on the battery indicates that the battery must not be disposed of with unsorted common municipal waste. As the end-user, it is your responsibility to dispose of the end-of-life battery in your appliance in an environmentally sensitive manner as follows: (1) returning it to the distributor/dealer from whom you purchased the product;...
-
Page 6: About Your Roomba
About your Roomba Robot Vacuum ® Top View Home Base RCON RCON Sensor Sensor Faceplate Handle IR Sensor Window Dust Bin Light Touch and Filter Sensor Charging Contacts Bin Release Button Buttons & Indicators Bottom View Multi-Surface Brushes Troubleshooting Indicator Brush Caps Cliff Sensor Wi-Fi Indicator... -
Page 7: Using Your Roomba
HOME App. CLEAN and then (Home) button on the robot or press CLEAN on the iRobot HOME App main screen. This will end the cleaning cycle. Download the iRobot HOME App and connect to Wi-Fi ®... - Page 8 CLEAN button. The Battery Indicator icon will illuminate amber when the battery is charging and green when the battery is fully charged. Battery charge status can also be viewed in the iRobot HOME App. Halo Mode: Toggle the switch to the Note: After each use, empty the bin and clean the filter.
-
Page 9: Emptying The Bin
There are additional instructional videos in the iRobot HOME App. If you notice the robot picking up less debris from your floor, empty the bin, clean the filter, and clean the brushes. - Page 10 Cleaning the Full Bin Sensors Cleaning the Front Castor Wheel Rinse the bin using warm water. Remove and empty the bin. Pull firmly on the front wheel to remove it. Remove any debris from inside the wheel cavity. Note: bin is not Reinstall all parts when finished.
- Page 11 Reinstall the brushes in the robot. Match the shape of the brush pegs with the shape of the brush icons in the cleaning head module. For more information, visit global.irobot.com...
-
Page 12: Troubleshooting
For best results, only use the iRobot lithium ion battery that comes with ). Follow the audible instructions. More detailed support and videos your Roomba robot vacuum. -
Page 13: Irobot Customer Care
Roomba, iAdapt, Home Base and Virtual Wall are registered trademarks of iRobot Corporation. Dirt Detect is a trademark of iRobot Corporation. App Store is a trademark of Apple, Inc., registered in the U.S. and other countries. Google Play is a trademark of Google, Inc.
Need help?
Do you have a question about the Roomba e6 and is the answer not in the manual?
Questions and answers
I keep getting an error message E6 and it says to clean the brushes. I did and the messages continues and machine stops.
To fix the E6 error message on your iRobot Roomba e6 after cleaning the brushes, follow these steps:
1. Check the Brush Installation – Ensure the brushes are correctly reinstalled. Match the shape of the brush pegs with the brush icons in the cleaning head module.
2. Clean the Brush Caps – Remove the brush caps from the ends of the brushes and clear any hair or debris. Reinstall the caps properly.
3. Clear Debris from Pegs – Remove any hair or debris from the square and hexagonal pegs on the opposite side of the brushes.
4. Clean the Charging Contacts and Sensors – Wipe the sensors and charging contacts with a clean, dry cloth. Do not use water or cleaning solution.
5. Check the Vacuum Path – Remove the bin and clear any obstructions from the vacuum path.
6. Follow Audible Instructions – If the Roomba gives a spoken message or troubleshooting alert, follow the instructions provided.
If the error persists after these steps, try restarting the Roomba or checking for further blockages.
This answer is automatically generated