Table of Contents
Advertisement
RN332100 MUK Rev1.qxp_IB 01/08/2018 16:11 Page 1
RN332100 MUK Rev1
Please read and keep these instructions for future use
Register your guarantee online:
We'll keep you updated with special offers, competitions and important product information.
IMPORTANT: To reduce limescale problems which would not be covered by the
guarantee, we recommend the use of a mix of 50% tap water and 50% distilled,
deionised or demineralised water (available from most large supermarkets).
Never use battery topping up fluid or water containing any substances like
starch, sugar, fragrant additives or defrosted water from a refrigerator.
Remember to clean and descale your steam generator.
Failure to adhere to the above guidelines will invalidate your guarantee.
The instruction booklet
1.
Or call our helpline: UK: 0344 871 0944, EIRE: 1800 409 119
3.
* Register online for your 2 year guarantee. See back of this instruction book for details. (UK and Ireland customers only)
Steam Generator
www.morphyrichards.co.uk/support
IF YOU HAVE ANY DIFFICULTY WITH THIS PRODUCT,
INSTEAD OF TAKING IT BACK TO THE RETAILER, TRY:
Refer to www.morphyrichards.com
2.
(For UK & Eire customers only)
Advertisement
Table of Contents
Related Manuals for Morphy Richards SPEED STEAMPRO
Summary of Contents for Morphy Richards SPEED STEAMPRO
- Page 1 RN332100 MUK Rev1.qxp_IB 01/08/2018 16:11 Page 1 RN332100 MUK Rev1 Steam Generator Please read and keep these instructions for future use Register your guarantee online: www.morphyrichards.co.uk/support We'll keep you updated with special offers, competitions and important product information. IMPORTANT: To reduce limescale problems which would not be covered by the guarantee, we recommend the use of a mix of 50% tap water and 50% distilled, deionised or demineralised water (available from most large supermarkets).
- Page 2 RN332100 MUK Rev1.qxp_IB 01/08/2018 16:11 Page 2 Important safety instructions The use of any electrical appliance requires the following common sense safety rules. Please read these instructions carefully before using the product. WARNING: Disconnect from the mains supply • before carrying out any routine maintenance. WARNING: Misuse of the appliance could cause •...
- Page 3 • CAUTION - HOT: • Do not use or keep this product • Use only genuine Morphy Richards Burns can occur from outside. spare parts and accessories. touching hot parts, hot • Do not store the appliance near hot water or steam, or the •...
- Page 4 RN332100 MUK Rev1.qxp_IB 01/08/2018 16:11 Page 4 Steam generator overview Filling aperture Iron handle (15) Rear docking slot Dirty water chamber Iron-to-base lock (16) Control panel Dirty water emptying hole (10) Cable support (17) Base unit Temperature indicator light (11) Water tank handle (18) Cord storage groove...
- Page 5 Connect to a mains outlet and press the On/Off power button (23). The button will illuminate and Temperature guide Heat setting markings on the temperature dial of all Morphy Richards irons match those of the International Textile Care Labelling Code Symbol (120°C Max) Cool...
- Page 6 WARNING: Do not use the product on a surface which could be damaged by heat or steam such as a worktop or a polished wood surface. If in doubt, contact Morphy Richards. Using the Steam Generator Remove the detachable water tank...
- Page 7 RN332100 MUK Rev1.qxp_IB 01/08/2018 16:11 Page 7 Using the Steam Generator (continued) Turn the temperature dial to suit the garment Unlock the iron from its storage position on top (see ‘Temperature guide’ on page 5). The of the base unit (17) by sliding the iron-to-base temperature indicator light...
- Page 8 RN332100 MUK Rev1.qxp_IB 01/08/2018 16:11 Page 8 Steam boost button The steam boost function is ideal for relaxing the fibres of tougher fabrics (like jeans and linen) and getting rid of those stubborn, hard to reach creases. To produce a steam boost during ironing, simply press the steam trigger twice in quick succession.
- Page 9 RN332100 MUK Rev1.qxp_IB 01/08/2018 16:11 Page 9 IMPORTANT: Ensure the dirty water is emptied Maintenance after each auto-clean cycle to prevent overflow. Auto-clean descale function WARNING: Dirty water in the dirty water Each time approximately 5L of water has been chamber will be hot after the auto-clean used in the steam generator, it will need to run an...
- Page 10 RN332100 MUK Rev1.qxp_IB 01/08/2018 16:11 Page 10 Storing the steam iron Lock the iron into the storage position on top of the base unit (17) by sliding the tip of the Allow the appliance to cool. soleplate under the iron locking hook (13). Remove the detachable water tank (12) by pulling...
- Page 11 RN332100 MUK Rev1.qxp_IB 01/08/2018 16:11 Page 11 Troubleshooting Problem Solution • No power or not heating up. Check the fuse and the fuse rating (should be 13amp). Try a different appliance in the socket as it may be the socket that is at fault.
- Page 12 Registering your 2 year Exclusions guarantee Morphy Richards shall not be liable to replace or repair the Your standard 1 year guarantee is extended for an goods under the terms of the guarantee where: additional 12 months when you register the product within The fault has been caused or is attributable to accidental 28 days of purchase with Morphy Richards.
Need help?
Do you have a question about the SPEED STEAMPRO and is the answer not in the manual?
Questions and answers
My iron is not steaming, the cord is cold , can I use a descaler in my speed steampro
If your Morphy Richards Speed Steam Pro iron is not steaming and the cord is cold, first check if the auto shut-off feature has activated. Wake up the iron and allow it to reach temperature before using steam. If the auto-clean or descale indicator is on, ensure the unit has completely cooled down before attempting the auto-clean process. The clean water tank must be filled to MAX with clean water and connected properly for descaling to work. The descale indicator will turn off only after the auto-clean process is completed correctly.
This answer is automatically generated