Cleaning And Maintenance; Cleaning The Shaver Under The Tap - Philips 9000 Series Manual

English
20 sec.
20 sec.

Cleaning and maintenance

Cleaning the shaver under the tap

S9090-43_EN_A6_CS6_0519.indd 33
8 After approx. 20 seconds, move the appliance
to your other cheek and start cleansing this part
of your face.
9 After approx. 20 seconds move the appliance
to your forehead and start cleansing this part of
your face. Gently move the brush head from left
to right.
Note: We advise you to not overdo the
cleansing and to not cleanse any zone longer
than 20 seconds.
10 After the treatment, rinse and dry your
face.Your face is now ready for the next step of
your daily skincare routine.
11 Clean the attachment after use (see 'Cleaning
and maintenance').
Note: The accessories supplied may vary for
different products. The box shows the accessories
that have been supplied with your appliance.
Clean the shaver after every shave for optimal
performance.
Be careful with hot water. Always check if the
water is not too hot, to prevent burning your
hands.
Never dry the shaving unit with a towel or tissue,
as this may damage the shaving heads.
1 Switch on the shaver.
33
17/05/19 18:3