Micro_Lite_Controller Software; Getting Started; Running The Micro_Lite_Controller; Connecting To The Micro-Single - Apantac Micro-Single User Manual

Production quality, compact sdi converter / scaler

Table of Contents

5.0

Micro_Lite_Controller Software

5.1

The Micro_Lite_Controller is design to allow you to quickly access all the feature sets of the

Micro-Single on a single User Interface. This section will help you get the Micro-Single up and

running with the Micro_Lite_Controller as quickly as possible.

5.2

Before you can successfully run the Micro_Lite_Controller, you must first copy it from the CD

provided and place it in an appropriate location on your computer's HDD.

Now you can run the Micro_Lite_Controller by double clicking on the "Apantac

Micro_Lite_Controller" icon.

5.3

To connect to the Micro-Single your PC must be connected to the same subnet as the Micro-

Single. The default IP address for the Micro-Single is 192.168.1.151

APANTAC LLC, 10200 SW Allen Blvd. Suite C, Beaverton, OR 97005 USA

info@apantac.com, TEL: +1 503 968 3000, FAX: +1 503 389 7921

Micro-Single Production Quality, Compact SDI Converter / Scaler

Figure 5.1: Double click on the Apantac Micro_Lite_Controller

Table of Contents

Do you have a question about the Micro-Single and is the answer not in the manual?