IRSAP THE RADIATOR COMPANY Uxbridge Fitting Instructions

Technical Specifications
Materials
Cast iron.
Connections
½" flow and return bottom opposite end.
Test pressure
10.3 Bar
Testing authority
EN442
Maximum operating pressure
6 Bar
Maximum working temperature
110ºC
Packaging
Paper pulp channels, corrugated cardboard & polythene sleeve.
PLEASE NOTE: Systems using micro bore pipework must have adequate pressure and flow
rates for the number and style of radiators on the system.
Terms & Conditions
All products must be inspected once removed from the packaging and The Radiator Company notified
within 28 days of delivery of any scratches, blemishes or other damage.
The Radiator Company will then replace the radiator.
Imperfect radiators should therefore not be fitted and The Radiator Company will not accept responsibility
for replacement of scratched or damaged radiators once they have been fitted. This includes any
consequential loss or cost of fitting.
If The Radiator Company are not notified within 28 days of the date on the signed delivery note then it
will be deemed that The Radiator Company have fully complied with its obligations and claims will not be
considered.
Failure to comply with any of the above may invalidate any claims.
We recommend that after you check the product on delivery that it is stored in its packaging to prevent damage
prior to installation. The Radiator Company cannot accept responsibility for items damaged after delivery.
Guarantees & Liabilities
As we are not the manufacturers of this product we will take all reasonable endeavours to make over to you
the benefit of any warranty or guarantee given by the manufacturer, which is usually five years on most of our
range. (Copies of specific guarantees for any of our products are available on request).
The guarantees in all cases are subject to the products being installed in accordance with British and or
European standards as well as these fitting instructions. The guarantees in all cases are restricted to the free
of charge replacement or repair of the failed product only. Our liability will under no circumstances extend
beyond the repair or replacement of the product supplied by us. Claims for either labour in replacement or
damage to property are not admissible. Any goods that are returned, in the event
of a problem, will belong to The Radiator Company.
Please Note: We strongly recommend flushing the heating system post installation of new
radiators and then adding the correct quantity and type of inhibitor for use with your radiator
and system to prevent corrosion. Damage caused to systems not protected by a suitable
inhibitor will not be covered by manufacturer's guarantee.
If you have any questions please contact us: 01342 302250, www.theradiatorcompany.co.uk
THE
RADIATOR
COMPANY
Fittings Instructions
4 Column cast iron radiator perfect for any
period property.
Please read these instructions and terms and
conditions carefully prior to installation.
Failure to do so may invalidate the warranty.
The Radiator Company
Units 13 - 14 Charlwoods Road
East Grinstead
West Sussex
RH19 2HU
UXB_IR_1.0
A brand of , Italy's leading manufacturer of design led radiators
Uxbridge
10