1. Manuals
  2. Brands
  3. TIE DOWN Manuals
  4. Safety Equipment
  5. Big Foot 60060US
  6. Safety & operation manual

TIE DOWN Big Foot 60060US Safety & Operation Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Do not throw away these instructions!
Read and understand these instructions before using this product.
BIGFOOT Fall
Protection Device
Model 60060US
Serious injury or death may occur if this equipment is used for purposes other than intended. Tie Down provides
the following instructions for the use and care of this equipment. It is the responsibility of the user to understand
and convey proper instruction to any and all individuals who use this product for Fall Arrest.
The BIGFOOT complies with the new OSHA Rule in affect: Walking-Working Surfaces, #1910.28, please comply
with this as well as all Local, State and Federal OSHA rules. The BIGFOOT is compliant with OSHA Fall
SAFETY & OPERATIONS
MANUAL
For USA
Protection Regulation 1926.502
404-344-0000 • www.tiedown.com
605 Stonehill Drive SW, Atlanta, GA 30336
Instruction #08333 (E1723 - Rev. 7/9/20)
sales@tiedown.com
On Line
Manual
Declaration
of Conformity

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Big Foot 60060US and is the answer not in the manual?

Questions and answers

Related Manuals for TIE DOWN Big Foot 60060US

Summary of Contents for TIE DOWN Big Foot 60060US

  • Page 1 Model 60060US Serious injury or death may occur if this equipment is used for purposes other than intended. Tie Down provides the following instructions for the use and care of this equipment. It is the responsibility of the user to understand and convey proper instruction to any and all individuals who use this product for Fall Arrest.
  • Page 2 New in the Tie Down line of mobile fall arrest systems. The BIGFOOT allows those working on concrete to be tied off safely yet also providing a great deal of mobility. • Good for one worker in arrest and two in restraint (USA) •...

  • Page 3: Pinch Point

    Installing Ballast Plates The Bigfoot requires 20 ballast weights to be inserted prior to use. Axle Spacer For safety, the axle spacer automatically Axle Spacer distributes the ballast weights. Place 13 ballast weights on the large side of the axle spacer. Place the remaining 7 ballast weights on the small side of the axle spacer Ballast Brackets...
  • Page 4 Set Up Secure the Ballast Weights Once the ballast weights are set use the red safety cable to secure the weights. Red Safety Cable The red safety cable must pass Cable through all 20 of the ballast weights. Use a lock to secure the cable. Red Safety Cable Do not operate the Bigfoot until all 20 weights are placed and the red...
  • Page 5 Applications When set up properly the BIGFOOT allows for one worker to be tied off for fall arrest and two workers in fall restraint (USA) . Fall Restraint System – A fall restraint system (FRS) prevents the user from falling. The system is comprised of a body harness along with an anchorage, connectors and other equipment.
  • Page 6 Applications: Surfaces Recommended Surfaces: Do Not Use on the Following Surfaces: ✖ Metal Deck less than 22 ga. ✔ Concrete Or over 20 ga. (Structural Deck) ✔ Modified Bitumen Membranes ✖ Loose laid material not part of a complete ✔ Built-up Roofing (BUR) Membrane finished system.
  • Page 7 Range of Use Chart Placement/Repositioning of the BIGFOOT Distance to Maximum Leading Edge Range of Use 8 ft. 16 ft. Prior to Positioning the BIGFOOT: 9 ft. 18 ft. Verify that the surface is capable of supporting the BIGFOOT, ballast weights, cart, and all personnel using it. 10 ft.
  • Page 8 Setting the Ballast Weight Position the BIGFOOT at an approved location near your leading edge. Flip the lever on the handle so the knob faces up. Rotate the handle counter-clockwise until the wheels are not rested on the ground. This ensures that the ballast weights are set Counter clockwise raises the wheels and the BIGFOOT cart is ready to use.
  • Page 9 Connecting to the BIGFOOT DO NOT hook Personal Fall Arrest System (PFAS) to any point except a Fall Arrest or Fall Restraint Anchor D-ring. When making connections, only use double-locking snap hooks and double-locking carabiners with this equipment. Only use connectors that are suitable to each application. Ensure all connections are compatible in size, shape and strength.

  • Page 10: Maintenance And Care

    IMPORTANT: BEFORE USING THIS UNIT, A RESCUE PLAN MUST BE ADOPTED. OSHA requires employers to provide a quick rescue of employees in the event of a fall or employers shall assure that employees are able to rescue themselves. It is impossible to guarantee that an employee can rescue himself because he may be unconscious or injured as a cause or result of the fall.
  • Page 11 General Safety Precautions Ensure that all areas directly underneath, and in front of the cart, are clear and free of debris. Do not use on roofs with ice or snow. Only use the unit on a surface or roof composition for which it has been tested. Do not set unit atop unfastened materials.

  • Page 12: Replacement Labels

    Replacement Labels WARNING ADVERTENCIA WARNING DO NOT CONNECT ANY NO CONECTE NINGUNA #15802 Rev. 12/18 FALL PROTECTION TO PROTECCIÓN CONTRA LA CAÍDA PROPER SETUP REQUIRES THE HOISTING RINGS A LOS ANILLOS DE ELEVACIÓN Tag #15802 THAT WHEELS MUST BE One on Each Ring OFF THE SURFACE AND SPIN FREELY PRIOR TO USE Label #15239...
  • Page 13 BIGFOOT FALL PROTECTION LIMITED WARRANTY Tie Down (TIE DOWN) will repair or replace, free of charge, any part, or parts of the Bigfoot Fall Protection Device that are defective in material or workmanship or both. The limited warranty is in effect for 90 days from date of purchase. Return the defective unit to the dealer or contact Tie Down direct at 800-241-1806.

  • Page 14: Declaration Of Conformity

    The results of testing apply only to the particular sample tested and to the specific test carried out. This Certificate is only issued for products which have passed the testing requirements of listed standard(s). Tie Down Engineering, Inc. 404-344-0000 contact@tiedown.com...

  • Page 15: Test Report

    Max 2 workers in fall/travel restraint per unit • Per the ANSI standard, the minimum distance the product should be setup is 8 feet from the leading edge. Tie Down Engineering, Inc. 404-344-0000 contact@tiedown.com 605 Stonehill Drive, SW www.tiedown.com Atlanta, GA 30336...
  • Page 16 Are the Anti Skid Pads Cracked or Worn? Date Corrective Action Taken: Safety Products Division 605 Stonehill Drive SW, Atlanta, Georgia 30336 800-241-1806 • 404-344-0000 • www.tiedown.com ISO 9001:2015 Certification Intellectual property of TIE DOWN Inc. ©2018 TIE DOWN, Inc. Instruction #08333 (E1723 Rev. 7/9/20)

Table of Contents