Programming The Machine - Saeco Royal SUP 016 User's And Maintenance Booklet

75
the selected figures in a menu item using the
keys . The key ENT memorizes the
selected options |for instance "ON" for the cup
heating plate).
Should you accidentally change some data,
press ESC to leave the menu item without saving
the new options, which were selected acciden-
tally.
Language selection
Move the asterisk to the menu item "LAN-
GUAGE" using the keys
activate this item. The following message will be
displayed:
The keys allow you to change the set
options DEUTSCH ITALIANO FRANCAIS
"ENGLISH" "ESPANOL" or "PORTUGUES".
Enabling of second heating system
Royal Professional is equipped with two boilers
with independent circuits. One of these boilers
can be disconnected. By pressing keys
move the asterisk at the end of the line to the
menu item "SYSTEM 2". Press ENT to activate
this item. The following message will be dis-
played :
The keys allow you to change the set
options: on, off.
If the second boiler is disconnected it is not
possible to dispense steam and therefore cap-
puccino can't be prepared. Should the cappuc-
cino selection button be pressed or the steam/hot
water knob be opened, the display shows the
following message:
PLEASE ACTIVATE
SYSTEM 2
Water hardness adjustment
In order to adjust the water hardness, it is

PROGRAMMING THE MACHINE

necessary to test the water using the strip
supplied with the machine. Dip the strip into the
water for a second, shake off excess water
gently, wait approx. 1 minute and read the
results.
Move the asterisk at the end of the line to the
menu item "WATER HARDN." using the keys
button.
The following message will be displayed:
. Press ENT to
The keys
options:
Cup heating plate connection
Royal Professional is equipped with a useful cup
2 SYSTEM 2
heating plate which can be disconnected, if
ON
required.
Press keys
"CUP HEATER". Press ENT to activate this
function.
The following message will be displayed:
The keys
options "ON" or "OFF".
Temperature selection
With Royal Professional a precise adjustment of
the coffee temperature can be executed. Move
the asterisk at the end of the l i ne to the menu
items "Temp. I. coffee", "Temp. coffee or
"Temp. s. coffee" and select it by means of the
ENT key.
and select it by means of the ENT
3 WATER HARDN./
MEDIUM
allow you to change the set
HARDNESS 1
[very soft
HARDNESS 2
water) HARDNESS 3
(medium water)
HARDNESS 4
(hard water)
to move the asterisk to item
allow you to change the set
water)
(soft