In the event of a breakdown
Third brake lamp
Type A, W16W – 16W
F Unscrew the two nuts.
F Push the pins.
F If necessary, disconnect the connector to
remove the lamp.
F Change the bulb.
Changing a fuse
The fuse boxes are located:
154
-
in the lower dashboard on the left-hand side
(behind the cover).
-
under the bonnet (near the battery).
If fitted on your vehicle, an
additional fuse box is provided
for towing, the towbar and the
connections for body and platform
cab conversions. It is located on
the right-hand side behind the
load stop partition.
The information given concerns only those
fuses which can be changed by the user using
the tweezers located behind the dashboard
open storage compartment on the right-hand
side. For any other work, visit a CITROËN
dealer or a qualified workshop.
Professional repairers: for complete
information on the fuses and relays,
consult the wiring information and
diagrams available through the dealer
network.
https://www.automotive-manuals.net/
Removing and fitting a fuse
Good
Failed
Before changing a fuse, the cause of the fault
must be found and rectified.
F Use the tweezers.
Always replace a faulty fuse with a fuse of
the same rating.
CITROËN accepts no responsibility for the
cost incurred in repairing your vehicle or
for rectifying malfunctions resulting from
the installation of accessories not supplied
or not recommended by CITROËN and
not installed in accordance with the
specifications, in particular when the
combined power consumption of all of the
additional equipment connected exceeds
10 milliamperes.
Need help?
Do you have a question about the BERLINGO MULTISPACE and is the answer not in the manual?
Questions and answers
How do I link radio with phone
To link your phone to the radio in a Citroën Berlingo Multispace, follow these steps:
1. Ensure Bluetooth is turned on in your phone.
2. Access the menu on the car’s radio system.
3. Navigate to the "Phone" option and press OK.
4. Select "Bluetooth Configuration."
5. Choose "Connect/Disconnect Equipment."
6. Select the Bluetooth radio option when it appears.
7. Enter the PIN displayed on the screen (e.g., 0000).
8. Confirm the pairing request on both the car system and your phone.
9. If prompted, allow contacts and favorites sync.
Your phone should now be connected to the car’s Bluetooth system.
This answer is automatically generated