Download Print this page

The Garage Door Guru GD-RFO12 Instructions

Kit

Enlarged version

WARNING

This unit is supplied for low voltage switching. It

should not be used to switch 240v unless it is mount-

ed in an earthed enclosure.

This enclosure is not rated for external use and

should be used indoors only.

If the unit is connected to any machinery, that

machinery will operate during the coding

quence, therefore keep the operating area clear

during coding.

Keep the handsets out of reach of children and

keep it in such a way that the buttons can not be

pressed unintentionally.

Only operate the door when it is within view and

you are able to see that it is not obstructed.

We recommend this unit is fitted by a qualified Door

Systems Engineer.

WARRANTY

This unit is guaranteed for 2 years against any defects.

Full conditions are available on request

RFO

GD-

GD-RFO

Voltage : DC24V-48V

Current : 33.5mA

Fenland Garage Doors Ltd.

Bexwell Business Estate

Downham Market

PE38 9LT

se-

Instructions for GD Receiver Kit

01366 382815

help@thegaragedoorguru.com

www.thegaragdoorguru.co.uk

Table of Contents

Need help?

Do you have a question about the GD-RFO12 and is the answer not in the manual?

Page 1 WARNING This unit is supplied for low voltage switching. It should not be used to switch 240v unless it is mount- ed in an earthed enclosure. This enclosure is not rated for external use and should be used indoors only. Instructions for GD Receiver Kit If the unit is connected to any machinery, that machinery will operate during the coding...
Page 2 STEP 2 Arial—take care not Pairing your remotes to snap from the board EQUIPMENT CONNECTED TO THIS UNIT MAY OPERATE DURING THE CODING PROCESS Find the “Data” button on the control board (Below the green LED) Factory use Factory use Press the “Data”...

Save PDF