Advertisement
Quick Links
Direct Drive Series
Direct Drive Series
Free-Fall Series
INSTALLATION, OPERATION, MAINTENANCE & WARRANTY
INFORMATION
FOR THE FOLLOWING MODELS -
HERO: EX-1 / EX-2 / EX-3
PATRIOT: EZ-1 / EZ-2 / EZ-3
REBEL: EZ-4 / EZ-5 / EZ-6
Toll Free Tel: (800) 800-1640
Toll Free Fax: (855) 855-1540
support@ezanchorpuller.com
www.ezanchorpuller.com
CAUTION
: READ AND UNDERSTAND THIS MANUAL BEFORE INSTALLATION &
OPERATION OF EZ ANCHOR PULLERS. SEE SAFEGUARDS AND WARNINGS!
Advertisement
Summary of Contents for E-Z Anchor Puller HERO Series
- Page 1 Direct Drive Series Direct Drive Series Free-Fall Series INSTALLATION, OPERATION, MAINTENANCE & WARRANTY INFORMATION FOR THE FOLLOWING MODELS - HERO: EX-1 / EX-2 / EX-3 PATRIOT: EZ-1 / EZ-2 / EZ-3 REBEL: EZ-4 / EZ-5 / EZ-6 Toll Free Tel: (800) 800-1640 Toll Free Fax: (855) 855-1540 support@ezanchorpuller.com www.ezanchorpuller.com...
- Page 2 Electrical Wiring / Cable Size & Voltage Chart Page 7 Common Troubleshooting Solutions Page 8 The Hero Series (EX-1, EX-2, EX-3) Wiring Diagram & Specs Page 9 The Patriot Series (EZ-1, EZ-2, EZ-3) Wiring Diagram & Specs Page 11 The Rebel Series (EZ-4, EZ-5, EZ-6) Wiring Diagram & Specs Page 14 Free-Fall Operation &...
- Page 3 Thank you for purchasing an E-Z Anchor Puller Mfg. Co. drum anchor winch. E-Z Anchor Puller Mfg. Co. goes to great lengths to develop anchoring systems that not only meet all your performance and safety requirements, but are also designed with a style and finish that enhances the aesthetics of your vessel. Our commitment to quality, superior materials and processes is to ensure you will be pleased with your investment.
- Page 4 Carefully read the instructions provided in the manual sections that best apply to your Hero, Patriot or Rebel ● anchor winch. If there is any confusion or questions, call 1.800.800.1640 immediately. ● Ensure sufficient room to run electric cables to the drum anchor winch. Follow the instructions above including underdeck stiffening, alignment, mounting blocks and sealing procedures.
- Page 5 9. Do not machine or weld any part of the drum anchor winch. Such alterations may weaken the structural integrity and will void your warranty (see page 18). 10. Use suitable electrical wire gauges and connections between the battery, switch and other components. See “...
- Page 6 E-Z Anchor Puller Mfg. Co. recommends running the winch motor periodically if the vessel is not being used for a long period of time to keep all the moving parts lubricated. Always rinse off with fresh water after being exposed to corrosive environments to ensure that salt deposits and build up do not hinder anchor winch functionality.
- Page 7 accidentally reversed. Circuit breakers m ust be fitted to ensure warranty. If the drum anchor winch is overloaded or stalled the circuit breaker automatically cuts off power to the winch and protects the wiring and motor. The circuit breaker should be located within 42” of the battery per A BYC boating standards. Furthermore, the circuit breaker ...
- Page 8 COMMON TROUBLESHOOTING QUESTIONS FOR ANY ANCHOR WINCH *see additional chart for REBEL-specific inquiries on page 17. Issue Possible Cause(s) Solution(s) * numbers correlate to each other Motor Runs, but with 1. Insufficient Battery 1. Check battery terminal voltage Insufficient power or with under load.
- Page 9 S eries: EX-1 / EX-2 / EX-3 Installation Guide The Hero D irect Drive Wiring Diagram for Solenoid SD12-50 & Switch Gear for Winch EX-1 / EX-2 / EX-3 www.ezanchorpuller.com 1.800.800.1640...
- Page 10 BASIC MAINTENANCE PRACTICES Although much effort has been undertaken to manufacture the drum anchor winch to make it as durable as possible, the drum anchor winch may be operated in a corrosive environment. It is good practice to wash salt water off a ll running parts with fresh water after every use to avoid corrosion.
- Page 11 S eries: EZ-1 / EZ-2 Installation Guide The Patriot D irect Drive Wiring Diagram for Solenoid SD12-50 & Switch Gear for Winch ONLY FOR PATRIOT EZ-1 / EZ-2 ( see next page for EZ-3) www.ezanchorpuller.com 1.800.800.1640...
- Page 12 Wiring Diagram for Solenoid SD12-100 & Switch Gear for Winch ONLY FOR PATRIOT EZ-3 ( see previous page for EZ-1/EZ-2) www.ezanchorpuller.com 1.800.800.1640...
- Page 13 PATRIOT LINE & CHAIN RECOMMENDATION CHART Please follow the rope / chain configuration below in accordance with your unit and boat size. PATRIOT PERFORMANCE CHART Model EZ-1 EZ-2 EZ-3 Metal Type 316 Stainless Steel 316 Stainless Steel 316 Stainless Steel 18’...
- Page 14 S eries: EZ-4 / EZ-5 / EZ-6 Installation Guide The Rebel F ree-Fall Wiring Diagram for Solenoid SD12-100 & Switch Gear for Winch ONLY FOR REBEL EZ-4 / EZ-5 / EZ-6 www.ezanchorpuller.com 1.800.800.1640...
- Page 15 BEST MAINTENANCE PRACTICES When operating Free Fall drum anchor winches in saltwater may cause the salt to build up around the clutch and brake plates. To avoid the plates becoming stuck, rinse with freshwater after use. All other general maintenance and repair instructions outlined on page 6 apply. REBEL RECOMMENDED LINE &...
- Page 16 Welcome to Free-Fall: the difference between Rebels and Heroes/Patriots E-Z Anchor Puller’s Rebel Series (EZ-4, EZ-5, EZ-6) is our larger, t rue free-fall series. We say it is “true” free-fall because, unlike other anchoring solutions on the market who have “free-fall” capabilities in instances of emergency (a boat’s loss of power, a stuck anchor, etc.) our units are created to free-fall for regular,...
- Page 17 free-fall, the best way to make the winch direct drive is to put a 3 /8" bolt through the spool and shaft and tighten it with a nut before you put the rope on . Then on the side opposite the gearbox and motor, lower the block so that the pin in the clutch plate ...
-
Page 18: Warranty Information
WARRANTY INFORMATION T he agreement entered when you make an E-Z Anchor Puller purchase is subject to the following conditions limitations: ● 7-year warranty f or r ecreational vessel usage on winch motors and gearboxes w/ 3-year warranty on solenoids, switches, circuit breakers and fast fall systems ●... - Page 19 To be eligible for warranty protection please complete this form within 90 days of purchase & post to: Toll-Free Fax: 855.855.1540 support@ezanchorpuller.com Purchaser Info: Company:_____________________________________Name:___________________________________ Address:______________________________________________________________________________ City:____________________________________State:________________________ Zip:_____________ Email Address:________________________________________Cell Phone #:______________________ ---------------------------------------------------------------------------------------------------------------------------------------------- Supplier / Installer Info: Company:_____________________________________Name:___________________________________ Address:______________________________________________________________________________ City:_____________________________________State:________________________Zip:_____________ Email Address:________________________________________Cell Phone #:______________________ (Circle One): EX-1 / EX-2 / EX-3 / EZ-1 / EZ-2 / EZ-3 / EZ-4 / EZ-5 / EZ-6 Boat Manufacturer:__________________________ Boat Model &...
Need help?
Do you have a question about the HERO Series and is the answer not in the manual?
Questions and answers