Troubleshooting - GE LOGIQ V2 User Manual

After the Exam is Over

Troubleshooting

3-44
Please refer Service Manual if other messages appear on the
monitor display.
Table 3-9: Troubleshooting
System temperature is too high. System will shut down.
1. Select OK and reboot the system.
2. Check whether the ventilation hole is blocked, if yes,
3. If it still not works, stop operating the equipment and
System voltage fault. System will shut down.
1. Select OK and reboot the system.
2. If the same message appears after reboot, shut
3. If it still not works, stop operating the equipment and
System Error. Please reboot the system.
1. Select OK and reboot the system.
2. If the same message appears after reboot, shut
3. If it still not works, stop operating the equipment and
clean the ventilation hole.
perform the proper action for the patient. Inform a
qualified service person and contact a Service
Representative for information.
down the system then turn on the system.
perform the proper action for the patient. Inform a
qualified service person and contact a Service
Representative for information.
down the system then turn on the system.
perform the proper action for the patient. Inform a
qualified service person and contact a Service
Representative for information.
LOGIQ V2/LOGIQ V1
Direction 5610736-100 Rev. 9
–
User Guide