Page 6
1.Indicator:Display the current status of STB. Green is on, Red is deep standby. 2.7-Segment Display. 3.IR Receiver: Receive the IR signal from remote controller. 4.Smartcard reader slot: One Smart card slot is provided. 5.USB. 3.0A 10 11 1.CI slot 2.LNB IN: Connect to Satellite cable 3.ANT: Built-in wifi...
Page 7
1.4 Conditional Access Amongst the channels scanned via ZGEMMA H9 TWIN some channels can be properly tuned in only with the corresponding Smartcard and/ or CAM(Conditional Access Module).ZGEMMA H9 TWIN provides one Smartcard Reader slot and one Conditional lnterface slot. Users need to purchase those Smartcards and CAMs that are required for viewing such subscription based services.
Page 8
POWER MUTE Press to turn the product on or standby Press to mute the audio or un-mute NEXT Numeric Keys Press to go to Next Page Press to enter a channel number or nmbers according to the menu options INFO 2abc PREVIOUS Press to view the Program information...
Page 9
Composite video with digital audio 1 Gbit Ethernet Interface Linux Operating System USB 2.0 Downloadable Plug-ins supported HDMI 2.0 EPG supported Twin tuner DVB-S2X & DVB-S2X 8GB eMMC/1GB DDR Memory Automatic & Manual Service Scan supported Support TF Card Skin change supported MPEG2/H.264 and H.265 Stable power adaptor (external) HD HEVC/H.265 2160p60 Main-10 multi-format decoder...
Page 10
AC Adaptor(12V/3.0A) ARM Brahma15 1500Mhz 1024MB eMMC 8GB Linux version >4.0 AP@L3 VC-1 H.264 2160p 60fps WMV9 MP@HL...
Page 13
There are several ways to turn your ZGEMMA H9 TWIN ON or OFF. ZGEMMA H9 COMBO ZGEMMA H9 COMBO ZGEMMA H9 TWIN ZGEMMA H9 TWIN provides va rious la nguage s and he re ZGEMMA H9 TWIN you can choose the main language for your...
Page 25
Here you have two options DVB-S2X . 5 Modulation Select 64QAM or 256 QAM Auto. ZGEMMA H9 TWIN...
Page 27
2)unzip the recovery zip file and don't unzip the mmc zip file 3)copy the files to your usb stick. 3.RECOVERY YOUR ZGEMMA BOX 1) insert the usb stick to your zgemma box usb jack 2) press reset key power on your box 3) front panel will display boot/flsh/boot 4)the screen will display select options here select bootmenu 4.FLASH THE LINUX IMAGE TO YOUR ZGEMMA BOX...
Page 29
1.No video on TV Check first if the product is powered on and in operation mode. Check if the video cable is properly connected between TV and ZGEMMA H9 TWIN. Check if the satellite cable is properly connected to ZGEMMA H9 TWIN.
Need help?
Do you have a question about the H9 TWIN and is the answer not in the manual?
Questions and answers