Keyless Operation System - Mitsubishi MOTORS L200 Owner's Manual

Keyless entry key
+ side
- side
Keyless operation key
+ side
- side
5. Close the key case firmly.
6. Attach the screw (A) removed in step 1.
(Keyless entry key only)
7. Check the keyless entry system to see
that it works.

Keyless operation system*

The keyless operation system allows you to
lock and unlock the doors, start the engine
and change the operation mode simply by
carrying the keyless operation key with you.
Coin type The switches on the keyless operation key
battery
can also be used as the key switch of keyless
CR1620
entry system.
Refer to "Starting and stopping the engine"
on page 6-17.
Refer to "Keyless entry system*" on page
3-03.
The driver should always carry the keyless
operation key. This key is necessary for lock-
ing and unlocking the doors, starting the en-
gine and otherwise operating the vehicle, so
Coin type
before locking and leaving the vehicle, be
battery
CR2032
sure to check that you have the keyless oper-
ation key.
l People with implantable cardiac pace-
E00305601871
makers or implantable cardiovascular-de-
fibrillators should not go near the exterior
transmitters (A) or the interior transmit-
ters (B). The radio waves used by the key-
less operation system could adversely af-
fect implantable cardiac pacemakers or
implantable cardiovascular-defibrillators.
Club cab
OKTE17E1
Keyless operation system*
WARNING
Locking and unlocking
3
3-07