Care And Maintenance - BINO Hampton Cot bed Instructions Manual

WHEN THIS ITEM IS IN COT MODE:
The age range is from birth to 18 months.
• Warning: Be aware of the risk of open fire and other sources of strong heat, such as electric bar fires, gas
fires, etc. in the near vicinity of the cot.
• Warning: Do not use the cot if any part is broken, torn or missing and use only spare parts approved by
Global Procurement & Marketing Ltd
Grafton House
81 Chorley Old Road
Bolton
Lancashire
BL1 3AJ
Phone : 01282 698800
• Warning: Do not leave anything in the cot or place the cot close to another product, which could provide a
foothold or present a danger of suffocation or strangulation, e.g. strings, blind/curtain cords, etc.
• Warning: Do not use more than one mattress in the cot.
• The lowest position is the safest and that the base should always be used in that position as soon as the baby
is old enough to sit up.
• The thickness of the mattress used shall be such that the internal height (surface of the mattress to the
upper edge of the cot frame) is at least 500mm in the lowest position of the mattress base and at least
200mm in the highest position of the mattress base.
• All assembly fittings should always be tightened properly, checked periodically, and care should be taken
that no screws are loose, because a child could trap parts of the body, or clothing (e.g. strings, necklaces,
ribbons for babies' dummies), which could pose a risk of suffocation and strangulation.
• The safety of the cot could be adversely affected by fitting flammable drapes.
• To prevent injury from falls that when the child is able to climb out of the cot, the cot shall no longer be
used for that child
WHEN THIS ITEM IS IN BED MODE:
the minimum age shall not be less than 18 months and the maximum age shall not be more than 4 years old.
• WARNING. Do not place this child's bed near heat sources, windows and other furniture.
• WARNING. Do not use this child's bed if any part is broken, torn or missing.
• Children are likely to play, bounce, jump and climb on beds, therefore the child's bed should not be placed
too close to other furniture or windows, and should be placed either tight to any wall or have a gap of 300
mm between the wall and the side of the bed.
• Designed And Manufactured To BS EN 716:2008.
CARE & MAINTENANCE
• Scuff marks may be removed with a damp cloth.
• Occasional use of furniture polish will maintain the good looks of your cot.
• Periodically check all screw fixings to ensure they remain tight.