Maintenance; Cleaning; Disposal; Appendix - Silvercrest SMH 30 A1 Assembly Instructions Manual

♦ Screw the two locking screws Ø 6 x 20 mm
Allen key 3 x 3 mm
tight (3.).

Maintenance

♦ Check the stability and operational reliability of the wall bracket and the
attached load at regular intervals (at least quarterly).
♦ If necessary, tighten all of the product's screw connections.

Cleaning

WARNING
► Do not use aggressive or abrasive cleaning agents, as these can damage
the product's outer surfaces.
♦ Clean the product using a moistened cloth and a standard commercial
household detergent.

Disposal

Dispose of the product via an approved waste disposal company or your municipal
waste disposal facility. Observe the currently applicable regulations.
Please contact your waste disposal facility if you are in any doubt.
Dispose of all packaging materials in an environmentally friendly manner.

Appendix

Technical details

Maximal load capacity
Maximum total dimensions
Weight
SMH 30 A1
, and tighten the locking screws Ø 6 x 20 mm
B
A
approx. 43 x 23.4 x 54 cm
into the profile rails using the
A
B
30 kg (66 lbs)
approx. 2.4 kg
GB │ CY
hand
A
│
7 ■