Switching The Product On And Off; Setting The Direction Of Rotation; Using The Battery; Charging The Battery - ALDI FERREX FID 20-I User Manual

Using the battery

Switching the product on and off

Switching on
− Press and hold the on/off switch
The LED work light
way gently.
Switching off
− Let go of the on/off switch

Setting the direction of rotation

You can use the direction switch
rotates.
− Press the switch on the left-hand side:
the impact driver will rotate anticlockwise.
− Press the switch on the right-hand side:
the impact driver will rotate clockwise.
Using the battery
WARNING!
Risk of injury!
Incorrect use of the rechargeable battery and charger can cause injury.
− This product does not come supplied with a battery. Only use the re-
chargeable batteries specified in the chapter 'Technical data' for the prod-
uct. Do not operate the product with rechargeable batteries from other
manufacturers.
− Read and follow the instructions in the user manual for the battery and
charger used.
− Remove the battery from the product when the product is not in use or is
being checked, cleaned or stored.

Charging the battery

− To charge the battery, follow the instructions described in the user manual for the
battery pack and charger used.
14
5 will turn on when the on/off switch is pressed down all the
.
6
2 to set the direction in which the impact driver
6 .