Install New Drive Drawer (60-Drive) - Fujitsu ETERNUS AB Series Maintaining Hardware

Drive drawer release lever
b) Disengage both release levers by pulling the latches toward you.
c) While holding both release levers, pull the drive drawer toward you.
d) Remove the drive drawer from the drive shelf.
What to do next
Go to Install new drive drawer

Install new drive drawer (60-drive)

You install a new drive drawer to replace the failed one. Installing a drive drawer into a drive tray entails
sliding the drawer into the empty slot, installing the drives, and replacing the front bezel.
Before you begin
• You know where to install each drive.
• You must have a replacement drive drawer.
• You must have a flashlight.
Procedure
1. From the front of the drive shelf, shine a flashlight into the empty drawer slot, and locate the lock-out
tumbler for that slot.
The lock-out tumbler assembly is a safety feature that prevents you from being able to open more than
one drive drawer at one time.
(60-drive).
| Drives |
59