Adding Another Source - Bose SOUNDLINK Owner's Manual

Tab 8, 16 Tab 7, 15
O
PERATION

Adding another source

You can use another audio device, such as a
portable digital music player, with your
®
SoundLink speaker. This requires using an
audio cable with a 3.5 mm plug on one end
to connect with the AUX input on the
®
SoundLink system. A cable with a 3.5 mm
plug on both ends is provided.
To add a source
1. Plug the cable from the audio device into
the (AUX) connector on the back of
the SoundLink speaker.
2. Press the AUX button.
3. Adjust the volume on the connected
device to near maximum, then use the
®
SoundLink speaker volume buttons to
adjust the level.
18
Tab 6, 14 Tab 5, 13 Tab 4, 12 Tab 3, 11
If a device is connected but not playing
audio, the speaker will turn itself off after 30
minutes.
Service connector
The service connector on the rear of the
speaker is for software updates only and will
not play audio from any connected device.
Tab2, 10 English