Bluetooth Mode - Tracer Splash L BT TWS Instructions For Use Manual

Instructions for use
3. Next song /volume up. Short press to next song, long press to up volume.
4. Previous song/ volume down. Short press to previous song, long press to down
volume.
5. U-disk interface.
6. Charger interface.
7. TF card interface.
8. Audio in charge.

Bluetooth mode

1. Bluetooth version: Bluetooth 5.0, supports HSP,HFP,A2DP protocol, with English
prompt voice, and bluetooth device name TRACER Splash L.
2. Press switch button (2 seconds),on or off. After the opening, speaker makes
a prompt voice, the blue light flashes quickly, and the speaker goes into bluetooth
mode.
3. The blue light flashes by quick into the matching state and the phone searches for
the name of the TRACER Splash L device to connect. If you need the password,
enter it (0000), when the connection is successful the blue light is always bright
and speaker indicate a successful sound. The blue light flashes slowly during the
music playing. Once the paired phone turns on bluetooth and then automatically
reconnects the speakers.
AUX In mode
1. Insert AUX In automatically into AUX In mode and the blue light flashing by slow.
TF card & U-disk mode
1. Once speaker has inserted the TF card or U-disk and automatically switched to
music mode.
How to set-up TWS function:
Power on two same speakers at same time. And make sure the two same speakers
are in bluetooth mode. Two same speakers will pair bluetooth each other automati-
cally. You will hear indication voice „Dong" around 3 seconds later. It means TWS
funcion set-up successfully. If want to cancel or set-up TWS function again, just keep
pressing the Play/Pause button 3 seconds.
Tracer Splash L
BT TWS
EN
9