Download Print this page
Siemens 8GK4 801-2KK13 Mounting Instruction
Siemens 8GK4 801-2KK13 Mounting Instruction

Siemens 8GK4 801-2KK13 Mounting Instruction

Advertisement

Quick Links

D
Montageanleitung SS-System 60mm
Istruzione di montaggio
I
Mounting instruction
GB
Instruction de montage
F
E
Instrucciones de montaje
Instruções de montagem
P
Achtung: max. Sammelschienenhalterabstand 500mm
Warnhinweis:
Montage und Installation von elektrischen Betriebsmitteln dürfen nur durch Elektrofachkräfte erfolgen.
Attenzione.:
Il montaggio e l´installazione delle apparecchiature elettriche deve essere eseguito solo da personale specializzato.
Warning:
Assembling and installation of electrical equipment may only happen by electro specialists.
Avertissement: Le montage et l'installation de matériel électrique ne doivent être confiés qu'à des électriciens qualifiés.
Advertencia:
El montaje e instalación del material eléctrico sólo debe ser ejecutado por personal especializado en
instalaciones eléctricas.
Siemens AG
Bereich Automation und Drives
Geschäftsgebiet Electrical Installation Technology
Postfach 100953, D-93009 Regensburg
Achtung Sammelschiene:
Für ausreichend Abstand
im Nachbarfeld sorgen!
Bei 10mm Cu-Schiene
graues Teil in Sammel-
schienenhalter drehen
©Siemens AG 2007
Änderungen vorbehalten
und Standverteiler
unten nicht montierbar!
1/2
Seiten
8GK4 801-2KK13
8GK4 801-2KK23
8GK4 801-2KK33
8GK4 801-3KK13
8GK4 801-3KK23
8GK4 801-3KK33
Bausatz H300
im Wandverteiler
Tiefe 210 (IP 43)
Update: http://www.siemens.de/installationstechnik
ALPHA
Juni 2007
1128000992
Technik-Handbuch

Advertisement

loading

Summary of Contents for Siemens 8GK4 801-2KK13

  • Page 1 ALPHA Juni 2007 8GK4 801-2KK13 Montageanleitung SS-System 60mm 8GK4 801-2KK23 8GK4 801-2KK33 Istruzione di montaggio 8GK4 801-3KK13 8GK4 801-3KK23 Mounting instruction 8GK4 801-3KK33 Instruction de montage Instrucciones de montaje Instruções de montagem Achtung Sammelschiene: Für ausreichend Abstand im Nachbarfeld sorgen!
  • Page 2 Bei 10mm Cu-Schiene graues Teil in Sammel- schienenhalter drehen 5SH3 536 5SH3 537 5SH3 536 (Rest-Feld- abdeckung) 1128000992 Technik-Handbuch Siemens AG Seiten Bereich Automation und Drives ©Siemens AG 2007 Update: http://www.siemens.de/installationstechnik Geschäftsgebiet Electrical Installation Technology Änderungen vorbehalten Postfach 100953, D-93009 Regensburg...

This manual is also suitable for:

8gk4 801-2kk238gk4 801-2kk338gk4 801-3kk138gk4 801-3kk238gk4 801-3kk33