At+Cpof Power Down The Module - SimCom SIM7500 Series At Command Manual

Hide thumbs Also See for SIM7500 Series:

Table of Contents

0 – all ports

1 – use UART port to output URCs

2 – use MODEM port to output URCs

3 – use ATCOM port to output URCs

4 – use cmux vritual port1 to output URCs

5 – use cmux virtual port2 to output URCs

6 – use cmux vritual port3 to output URCs

7 – use cmux vritual port4 to output URCs

AT+CPOF Power down the module

This command is used to power off the module. Once the AT+CPOF command is executed, The

module will store user data and deactivate from network, and then shutdown.

Test Command

Execution Command

SIM7500_SIM7600 Series_AT Command Manual_V1.07

Smart Machine Smart Decision

Do you have a question about the SIM7500 Series and is the answer not in the manual?

Sim7600 series