Fm Display Modes - Hitachi KH330E Instruction Manual

FM Display Modes

Every time you press the DISPLAY button, the display will cycle through the following
display modes: Audio Type,
Type
, Sleep Timer Status.
Audio Mode
When in FM mode, the display will show if the
GB
station being received is in mono or stereo.
The receiver will automatically switch between
Stereo and Mono mode in Auto mode. You can
however override this function, so that you
can manually switch to Mono mode, which is
helpful if you're listening to a poor FM signal.
To switch between Auto and Mono, press the ENTER
button once, you will see on the display "Auto" or
"Mono". To toggle between each mode just press the
ENTER button again
Programme Service
The station name will be displayed. If
programme service information is not available,
the display will show the frequency.
Radio Text
As with DAB, the broadcaster can include a
scrolling text that displays information about
the current program. If Radio text information is
not available, then the display will show <Radio
Text N/A>.
Time/Date
The broadcaster (Radio station) provides clock
and date information automatically so there's
no need to manually set this information. In the
unlikely event that the broadcaster does not
transmit any clock information; the display will
show the incorrect time and <date>.
Programme Type
This describes the "Style" or "genre" of music
that is being broadcast e.g. "Rock" or "Classical".
If programme type information is not available,
the display will show <Prg Type N/A>.
20
Programme Service,
Radio Text, Time/Date,
Audio Mode
Programme Service
Radio Text
Time / Date
Programme Type
Sleep Timer Status
Programme