Table of Contents
Advertisement
Audio Extension I/O Modules
User Manual
Date 2/21/2020
1675 MacArthur Boulevard • Costa Mesa, CA 92626
Ph: 800/854-4079 or 714/957-7100 • Fax: 714/754-6174
© 2020 QSC, LLC all rights reserved. QSC and the QSC logo are registered trademarks of QSC, LLC in the U.S. Patent and Trademark office and other countries. All other
trademarks are the property of their respective owners. Patents may apply or be pending.
www.qsc.com
614-0006363
Advertisement
Table of Contents
Related Manuals for QSC ATTEROTECH Axiom Series
Summary of Contents for QSC ATTEROTECH Axiom Series
- Page 1 Ph: 800/854-4079 or 714/957-7100 • Fax: 714/754-6174 © 2020 QSC, LLC all rights reserved. QSC and the QSC logo are registered trademarks of QSC, LLC in the U.S. Patent and Trademark office and other countries. All other trademarks are the property of their respective owners. Patents may apply or be pending.
- Page 2 Axiom Product Family Attero Tech by QSC User Manual IMPORTANT SAFETY INSTRUCTIONS The symbols below are internationally accepted symbols that warn of potential hazards with electrical products. This symbol, wherever it appears, alerts you to the presence of un-insulated dangerous voltage inside the enclosure -- voltage that may be sufficient to constitute a risk of shock.
- Page 3 User Manual WARRANTY INFORMATION For a copy of the QSC Limited Warranty, visit the QSC website at www.qsc.com Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules and EN55022. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
-
Page 4: Table Of Contents
Axiom Product Family Attero Tech by QSC User Manual Contents 1 – Axiom Bus Overview ..........................................1 2 – ML1 – Overview ............................................1 – ML1 – What’s in the Box ................................1 – ML1 – Device Installation ............................... 2 ML1 –... - Page 5 Axiom Product Family Attero Tech by QSC User Manual Device Specifications............................................. iii ML1 Specs ......................................iii USB1 Specs ....................................... iii BT1 Specs ......................................iv AXP2O Specs ....................................iv AXPio Specs ....................................... v QSC, LLC 2020 614-00063...
-
Page 6: Axiom Bus Overview
Axiom Product Family Attero Tech by QSC User Manual – Axiom Bus Overview 8P8C TIA 568A TIA 568B Axiom Port The Attero Tech Axiom bus is a proprietary analog extension Pair: Color Pair: Color Function solution that leverages unshielded twisted pair cabling (CAT 5/6) -
Page 7: Ml1 - Overview
Axiom Product Family Attero Tech by QSC User Manual – ML1 – Overview Figure 3 - Product Overview Figure 2 – ML1 Front Panel Description The Axiom ML1 provides an installation friendly simple to operate analog audio extension solution for analog mic and line level... -
Page 8: Ml1 - Device Installation
AV system modularity where needed. *Note: CAD drawings can be downloaded from the QSC website. Please contact Attero Tech for any further product related information that is not accessible on the website. -
Page 9: Ml1 - Signal Metering Led Indications
Axiom Product Family Attero Tech by QSC User Manual – ML1 – Signal Metering LED Indications Overview The ML1 is equipped with two LED indicators below the rotary The ML1 may be configured for single use, or daisy-chained with encoders for each the ¼”/XLR Mic input and the 3.5mm line input. -
Page 10: Usb1 - Overview
Axiom Product Family Attero Tech by QSC User Manual – USB1 – Overview Figure 9 - Product Overview Figure 8 – USB1 Front Panel The Axiom USB1 provides bidirectional USB audio connectivity for Description education, corporate or hospitality applications. Connect a PC or Status LED music content server to interface your device’s USB audio content... -
Page 11: Usb1 - Device Installation
AV system modularity where needed. *Note: CAD drawings can be downloaded from the QSC website. Please contact QSC for any further product related information that is not accessible on the website. Figure 10 - Dimensional Drawing QSC, LLC 2020... -
Page 12: Usb1 - Status Leds
Axiom Product Family Attero Tech by QSC User Manual – USB1 – Status LEDs – Device Config & Workflow Overview The USB1 is equipped with a single LED indicator above the USB The USB1 may be configured for single use, or daisy-chained with port. -
Page 13: Bt1 - Overview
Axiom Product Family Attero Tech by QSC User Manual – BT1 – Overview Figure 13 - Product Overview Figure 12 – USB1 Front Panel Description The Axiom BT1 provides two-way Bluetooth connectivity and a 3.5 stereo audio connector, allowing users... -
Page 14: Bt1 - Device Installation
AV system modularity where needed. *Note: CAD drawings can be downloaded from the QSC website. Please contact QSC for any further product related information that is not accessible on the website. Figure 14 - Dimensional Drawing QSC, LLC 2020... -
Page 15: Bt1 - Status Leds
Axiom Product Family Attero Tech by QSC User Manual – BT1 – Status LEDs – BT1 – Device Settings The BT1 is equipped with a single LED indicator above the pairing The BT1 is designed use in a number of configurable modes to button. -
Page 16: Bluetooth® Audio Bridging
Axiom Product Family Attero Tech by QSC User Manual In order to attach a different device, either pairing list has to be – Bluetooth® Pass-through AVRCP (AV cleared or the device mode needs to be changed. Remote Control Protocol) Many installed AV systems in both residential and commercial *Note: In all modes once paired/connected, the Bluetooth®... -
Page 17: Axp2O - Overview
Axiom Product Family Attero Tech by QSC User Manual – AXP2O – Overview Figure 16 – AXP2O Front Panel The Axiom AXP2O provides analog audio output breakout, power injection and control system connectivity to Attero Tech’s Axiom endpoint products. The installer friendly form factor allows it to be placed on an equipment rack shelf or mounted to any flat surface. -
Page 18: Axp2O - Device Installation
Axiom Product Family Attero Tech by QSC User Manual – AXP2O – Device Installation – Mounting With the cable attached, carefully place the Axiom wall plate into A typical installation will involve mounting an Axiom wall plate the wall box taking care to not trap the cabling. Once fully in into a pre mounted single-gang or larger wall box, standard place, secure it with the screws provided. -
Page 19: Audio Connections
Axiom Product Family Attero Tech by QSC User Manual – Audio Connections – 3 Party Control The AXP2O provides balanced audio outputs to external analog The RS-232 port on the AXP2O break-out box is intended for audio equipment. Refer to the following diagrams for connecting... -
Page 20: Axpio - Overview
Axiom Product Family Attero Tech by QSC User Manual – USB1 – Device Installation – AXPio – Overview Figure 21 – AXPio Front/Back Panels The Axiom AXPio provides switchable analog audio input/output breakout, power injection and control system connectivity to Attero Tech’s Axiom endpoint products. -
Page 21: Mounting
AXPio to the RJ45 on the Axiom device. *Note: CAD drawings can be downloaded from the QSC website. Please contact Attero Tech by QSC for any further product related Apply power by plugging in the 24V DC power supply to the DC information that is not accessible on the website. -
Page 22: Hardware Connections
Axiom Product Family Attero Tech by QSC User Manual Hardware – Balanced to Balanced Wiring Connections The AXPio provides balanced line-level audio connections to external analog audio equipment. Refer to the following diagrams and instructions for connecting different types of audio devices to the input and/or outputs of the AXPio. -
Page 23: Audio Configuration
Axiom Product Family Attero Tech by QSC User Manual – Audio – 3 Party Control Configuration The RS-232 port on the AXPio break-out box is intended for connectivity to 3 party control systems for extended integration Based on the I/O mode selected the device can be configured with of Axiom into professional AV applications. - Page 24 Axiom Product Family Attero Tech by QSC User Manual QSC, LLC 2020 614-00063...
-
Page 25: Architects & Engineers Specification
Axiom Product Family Attero Tech by QSC User Manual ARCHITECTS & ENGINEERS SPECIFICATION The single gang mount interface unit shall have two potentiometers on the front panel for gain control of the 3.5mm input and the balanced input independently. The unit shall have a 3.5mm stereo consumer level input and a ¼”/XLR combo Mic/Line input. This input is amplified and sent to the Axiom bus. -
Page 26: Axp2O
Axiom Product Family Attero Tech by QSC User Manual AXP2O The device shall have an 8P8C connector for connectivity to Axiom bus compatible products. Two 3-position de-pluggable terminal blocks provide balanced analog audio breakout from the Axiom port for connectivity to the balanced or unbalanced inputs of external audio equipment. -
Page 27: Device Specifications
Axiom Product Family Attero Tech by QSC User Manual Device Specifications ML1 Specs Audio Inputs (Mic/Line) Axiom Connector Type XLR – ¼” Combo Physical Layer Analog Audio, RS-232 Control, 24V DC Power Gain 0 to 50 dB Connector (s) 8P8C Input Impedance >2kOhms at any gain (mic) >10kOhms Line... -
Page 28: Bt1 Specs
Axiom Product Family Attero Tech by QSC User Manual BT1 Specs Audio Inputs (Bluetooth/Line) Axiom Stero Bluetooth® v3.0 audio receiver Physical Layer Analog Audio, RS-232 Control, 24V DC Power Input Types Stereo Unbalanced Inputs on 3.5mm TRRS Connector (s) 8P8C... -
Page 29: Axpio Specs
Axiom Product Family Attero Tech by QSC User Manual AXPio Specs Audio Inputs Axiom Port (when selected) Two switchable Balanced and RF filtered Physical Layer Analog Audio, RS-232 Control, 24V DC Power I/O Type 3-pin de-pluggable terminal blocks Connector (s)
Need help?
Do you have a question about the ATTEROTECH Axiom Series and is the answer not in the manual?
Questions and answers