Summary of Contents for Thrustmaster TM OpenWheel Add-On
Page 1
Europe, Middle East North America/ Norteamérica ENGLISH FRANÇAIS ENGLISH DEUTSCH FRANÇAIS NEDERLANDS ESPAÑOL ITALIANO Latin America/ ESPAÑOL América Latina PORTUGUÊS ENGLISH ESPAÑOL ΕΛΛΗΝΙΚΑ PORTUGUÊS TÜRKÇE Asia Paci c POLSKI 日本語 繁體中文 한국어...
Page 2
Base connector: Arrow pointing upwards Racing wheel connector: Arrow pointing upwards Once the connectors are correctly positioned, simply rotate the Thrustmaster Quick Release device’s ring counterclockwise, while holding the racing wheel in position. Then, tighten the ring as much as you can: to do so, hold the ring in position and rotate the racing wheel...
Page 3
Once you have installed the wheel, rotate it 180° (when facing the wheel, the TM logo should be upside down) to access the small attachment screw located on the ring of the Thrustmaster Quick Release device. Use a large Phillips screwdriver to tighten the small attachment screw (do not use excessive force), turning it clockwise.
Page 5
Thrustmaster product according to applicable laws of the country in which the consumer was domiciled on the date of purchase of the Thrustmaster product (if no such action exists in the corresponding country, then the warranty period shall be one (1) year from the original date of purchase of the Thrustmaster product).
Page 6
During the warranty period, Guillemot shall not provide, in principle, any spare parts, as Technical Support is the only party authorized to open and/or recondition any Thrustmaster product (with the exception of any reconditioning procedures which Technical Support may request that the consumer carry out, by way of written instructions –...
Need help?
Do you have a question about the TM OpenWheel Add-On and is the answer not in the manual?
Questions and answers