Related Manuals for ADT OC845
Summary of Contents for ADT OC845
- Page 1 ADT Interactive Solutions: Control & Pulse OC845 Wireless FHD Outdoor Camera Quick Installation Guide...
-
Page 2: Table Of Contents
1.800.ADT.ASAP and the product/service names listed in this document are marks and/or registered marks. Unauthorized use is strictly prohibited. OC845 (10/19) Property of ADT, LLC. Information accurate as of published date and is provided “as is” without warranty of any kind. -
Page 3: Introduction
Camera's features, components and capabilities. 1.1 Feature Overview The OC845 is an Outdoor day/night camera with FHD resolution and 802.11ac Wi-Fi connectivity intended for use with both ADT Control® and Pulse®. • Standalone Design. The camera is a standalone system with built-in CPU and video encoder. -
Page 4: Physical Details: Front And Rear Panels
The lens is fixed and cannot be adjusted. Please ensure Lens that the lens cover remains clean of dust and debris. IR LED Built-in Infrared LEDs for Night Time Illumination Light Sensor This is a hardware sensor to detect daylight level or lux. OC845 Outdoor FHD Camera Installation Guide... -
Page 5: Packaging Contents
1.3 Packaging Contents 2 Basic Setup This section provides information on how to assemble and configure the OC845 Outdoor FHD Camera for enrollment. 2.1 Assembling the Camera • Temporarily locate the camera close to the computer for enrollment. • Attach the camera stand to the camera and connect the power cable. -
Page 6: Final Steps
3 ADT Control Enrollment This section provides instructions for wirelessly enrolling the OC845 Outdoor FHD Camera onto the ADT Control platform. This process uses the Soft AP method to wirelessly connect the FHD Camera to the Customer’s network. 3.1 Using Soft AP to Enroll Camera •... - Page 7 It is imperative that the customer understands that all camera locations are limited by their existing Wi-Fi network and its range. Additionally, the Customer will need to enter their SSID password during the subsequent step. OC845 Outdoor FHD Camera Installation Guide...
- Page 8 • The LED will turn solid green when data is being transmitted indicating that the connection to the Customer’s router is complete. • Connect a laptop or mobile device to the Customer’s network and log in to the Control web portal, https://www.adt.com/control-login, to complete the setup. • Select Video from the menu list.
-
Page 9: Adt Pulse Enrollment
4 ADT Pulse Enrollment This section provides instructions for wirelessly enrolling the OC845 Outdoor FHD Camera into the ADT Pulse network. This process uses the Wi-Fi Protected Setup (WPS) with PIN method to wirelessly enroll the FHD Camera to the gateway via the ADT Pulse Portal or TS Installer App. - Page 10 • Locate the camera’s PIN number on the product label on the rear of the camera. • Enter the camera’s PIN into the WPS PIN field. • Ensure that the camera is powered on and that the LED is flashing green/amber. OC845 Outdoor FHD Camera Installation Guide...
- Page 11 The wireless connection is successful when the LED turns solid green Note: You must complete the WPS connection within 2 minutes or else the process will timeout. The time remaining is displayed in the upper-left portion of the screen. OC845 Outdoor FHD Camera Installation Guide...
- Page 12 • The following screen is shown while the camera is configured • When the Camera Details screen appears, showing that the camera has been enrolled, assign the OC845 a unique name (usually based on the location of the camera) in the Name field, and then click Save.
- Page 13 • At the top of the screen, click Go Back. • You are returned to the Manage Devices screen. The total number of installed cameras has increased by one. • Click Close and Close again to confirm. OC845 Outdoor FHD Camera Installation Guide...
-
Page 14: Wall Mounting
- Please refer to Section 5: Wall Mounting 5 Wall Mounting This section provides details for final mounting of the OC845 Outdoor FHD Camera. You should ensure that the camera is configured and enrolled in the platform before permanently mounting it. - Page 15 Caution: To avoid damaging the camera, be sure to observe proper polarity. Although the + and – terminals are marked on the power adapter, they are white on white and may be difficult to see. OC845 Outdoor FHD Camera Installation Guide...
-
Page 16: Smart Ir And Mounting Suggestion
If installing on a tabletop, place the camera as close to the edge as possible. If installing on a wall, angle the camera so that a minimal portion of the wall or column is visible, as demonstrated in the photos in row 2 below. OC845 Outdoor FHD Camera Installation Guide... -
Page 17: Troubleshooting
ADT OC845 FHD Outdoor Camera Quick Installation Guide The OC845 uses a smart IR function for night viewing. This means that the camera automatically adjusts the IR light output and gain. As a result, if any objects are in the close foreground of the image, the camera lowers the IR light output to prevent overexposing those objects. -
Page 18: Appendix
Operation Temperature: -40° ~ 122°F (-40° ~ 50°C) Storage Temperature: -40° ~ 158°F (-40° ~ 70°C) Ingress IP66 Accessories Accessories Power Supply (12VDC/1.5A, 100~240VAC) Ordering Information Part Number OC845: Full HD Wireless IP Camera OC845 Outdoor FHD Camera Installation Guide... -
Page 19: Regulatory Approvals
20cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Country Code selection feature to be disabled for products marketed to the US/CANADA OC845 Outdoor FHD Camera Installation Guide... -
Page 20: Industry Canada Statement
Déclaration d'exposition aux radiations: Cet équipement est conforme Canada limites d'exposition aux radiations dans un environnement non contrôlé. Cet équipement doit être installé et utilisé à distance minimum de 20cm entre le radiateur et votre corps. OC845 Outdoor FHD Camera Installation Guide...
Need help?
Do you have a question about the OC845 and is the answer not in the manual?
Questions and answers
changed netgear42 to netgear70. our outdoor camera wont connect to the netgear70