Sharp Auvi MD-DR77 Operation Manual page 123

Dividing a track
(DIVIDE) (page 80)
1. During playback, press the
wish to divide the track. Playback will be paused.
2. Press the MENU button.
3. Select "EDIT" by pressing the
the MENU button.
4. Select "DIVIDE" by pressing the
press the MENU button.
5. Press the MENU button. The track is divided.
Moving a track
(MOVE) (page 81)
1. In the stop mode, select the track to move by pressing the
or button.
2. Press the MENU button.
3. Select "EDIT" by pressing the
the MENU button.
4. Select "MOVE" by pressing the
press the MENU button.
5. Select a new position for the track by pressing the
button.
6. Press the MENU button. The track is moved.
Stamping titles from another MiniDisc
Before stamping
When the same tracks are recorded on 2 MiniDiscs, you can
transfer the character information (disc name, group name,
and track name) of the master MiniDisc to another MiniDisc
(for stamping).
What is a master MiniDisc?
A recordable MiniDisc that contains tracks and character information.
What is a MiniDisc for stamping?
A recordable MiniDisc that contains the same tracks in the same
order as the master MiniDisc (tracks only).
button at the point where you
or button and press
or button and
or button and press
or button and
or
(pages 82 - 83)
1-BIT PORTABLE MINIDISC RECORDER MD-DR77
1. Insert a master MiniDisc.
Do not mistake the master MiniDisc for the target one.
2. In the stop mode, press the MENU button.
3. Select "EDIT" by pressing the
the MENU button.
4. Select "NAME STAMP" by pressing the
and press the MENU button.
5. Press the MENU button.
6. When "CHANGE MD" appears, remove the master MiniDisc.
Remove it without turning the power off. Or the operation will
be canceled.
7. Insert the MiniDisc for stamping.
8. Press the MENU button. The information is written.
(pages 84 - 89)
GROUP EDITING
Moving a track to another group
(page 84)
1. Insert a group-recorded MiniDisc.
2. In the stop mode, select the track to move by pressing the
or button.
3. Press the MENU button.
4. Select "GROUP" by pressing the
press the MENU button.
5. Select "CHANGE" by pressing the
press the MENU button.
6. Select the destination group by pressing the
button.
7. Press the MENU button. The track is moved.
or button and press
or button
(GROUP CHANGE)
or button and
or button and
or
123