Sharp Auvi IM-DR80 Operation Manual page 131

To erase a character:
1. Set the unit to the character input mode.
2. Press the - or + to select the character you want to
erase.
3. Press the MODE button.
4. Hold down the ENTER (
or more.
To change a character:
Erase the character you want to change, and then add a
new one.
Erasing all the tracks at once
[Operate with the multi link station.]
1. While in the stop mode, hold down the ERASE button
for 2 seconds or more.
2. Press the ENTER button.
Erasing one track at a time
[Operate with the multi link station.]
1. While in the stop mode, select the track to erase by
pressing the or
2. Press the ERASE button.
3. Press the ENTER button.
Combining tracks
(COMBINE) (pages 76 - 77)
[Operate with the multi link station or remote control.]
( ) indicates operations on the remote control.
1. While in the stop mode, select the latter of the two
tracks to be combined by pressing the
button.
2. Press the MENU button.
3. Select "EDIT" by pressing the
press the ENTER ( ) button.
) button for 2 seconds
(ALL ERASE) (page 75)
(TRACK ERASE) (page 75)
button.
or
or button and
1-BIT PORTABLE MINIDISC RECORDER IM-DR80
4. Select "COMBINE" by pressing the
and press the ENTER (
5. Press the ENTER (
The tracks are now combined.
Dividing a track
(DIVIDE) (page 78)
[Operate with the multi link station or remote control.]
( ) indicates operations on the remote control.
1. During playback, press the
where you wish to divide the track. Playback will be
paused.
2. Press the MENU button.
3. Select "EDIT" by pressing the
press the ENTER ( ) button.
4. Select "DIVIDE" by pressing the
and press the ENTER (
5. Press the ENTER (
The track is now divided.
Moving a track
(MOVE) (page 79)
[Operate with the multi link station or remote control.]
( ) indicates operations on the remote control.
1. While in the stop mode, select the track to move by
pressing the or
2. Press the MENU button.
3. Select "EDIT" by pressing the
press the ENTER ( ) button.
4. Select "MOVE" by pressing the
and press the ENTER (
5. Select a new position for the track by pressing the
or button.
6. Press the ENTER (
The track is moved.
or button
) button.
) button.
button at the point
or button and
or button
) button.
) button.
button.
or button and
or button
) button.
) button.
131