Sharp PC-AX Series Manual
  1. Manuals
  2. Brands
  3. Sharp Manuals
  4. Laptop
  5. PC-AX Series
  6. Manual
Sharp PC-AX Series Manual

Sharp PC-AX Series Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual

Table of Contents

Notice for Users in Australia...................................................................................... i
Notice for Users in the UK........................................................................................ ii
Notice for Users in Europe....................................................................................... iii
Safety Precautions ......................................................................................................v
About This Manual................................................................................................. viii
Recording Important Information............................................................................. ix
Manual Conventions...................................................................................................x
Table of Contents ..................................................................................................... xi
Overview of Computer ........................................................................................... xiii
Turning Power On.................................................................................................. 1-1
Setting up Windows 98 .......................................................................................... 1-4
Shutting Down the System ..................................................................................... 1-5
Choosing Power Source ......................................................................................... 2-1
Resetting the System .............................................................................................. 2-3
Using The Glide Pad .............................................................................................. 2-4
Using The Keyboard .............................................................................................. 2-6
Using External Floppy Disk Drive Unit ................................................................. 2-8
Using CD.............................................................................................................. 2-11
Standard Battery Pack ............................................................................................ 3-1
Optional Batteries................................................................................................... 3-5
Power Management.............................................................................................. 3-11
Using Peripherals ................................................................................................... 4-1
Keyboard / Mouse .................................................................................................. 4-3
Display ................................................................................................................... 4-3
Audio System ......................................................................................................... 4-5
USB Device............................................................................................................ 4-6
Printer..................................................................................................................... 4-6
xi

Advertisement

Table of Contents
loading

Related Manuals for Sharp PC-AX Series

Summary of Contents for Sharp PC-AX Series

  • Page 1: Table Of Contents

    Table of Contents Notice for Users in Australia..................i Notice for Users in the UK..................ii Notice for Users in Europe..................iii Safety Precautions ......................v About This Manual....................viii Recording Important Information................ix Manual Conventions....................x Table of Contents ..................... xi Overview of Computer ...................
  • Page 2 Communication Functions Infrared Communication ..................5-1 Built-in Modem.......................5-4 LAN Unit ........................5-6 Hardware Expansion PC Card ........................6-1 Memory Module .....................6-3 Security Features Passwords .......................7-1 Preventing Infection of Computer Viruses..............7-3 Security Slot......................7-3 Setup Utility Running the Setup Utility..................8-1 Main menu ......................8-3 Advanced menu ......................8-4 Security menu ......................8-5 Power menu ......................8-6 Exit menu........................8-7...
  • Page 3 Overview of Computer Actual appearance of your computer may be slightly different depending on the model. Front LCD Screen Quick Start Buttons Microphone Keyboard Speaker Glide Pad Power Switch Audio Output Jack Microphone Jack Indicator Volume Control Indicator xiii...
  • Page 4 Right Ventilation Openings IR Port USB Port USB Port Power Switch AC Adapter Jack CD-ROM Drive Unit Port Left PC Card Slot Mini USB Port Mini USB Port LAN Jack Modem Jack (may not be available in some countries)
  • Page 5 Rear External Monitor Port Security Slot Bottom Sheet Battery Connector Reset Switch Ventilation Openings Battery Pack RAM Board Slot...

  • Page 6: Notice For Users In Australia

    SHARP is not in a position to authorise the copying or broadcasting of copyright materials and nothing in this OPERATION MANUAL should be implied as giving...

  • Page 7: Notice For Users In The Uk

    This apparatus must be protected by a 3A fuse in the mains plug or distribution board. Copyright Recording and playback of any material may require consent, which SHARP is unable to give. Please refer particularly to the provisions of the Copyright Act 1956, the Dramatic and Musical Performers Protection Act 1958, the Performers Protection Acts 1963 and 1972 and to any subsequent statutory enactments and orders.

  • Page 8: Notice For Users In Europe

    Notice for Users in Europe About the Modem Your Sharp PC-AX series with integral modem has been designed to work with the analogue PSTN’s in the following countries: United Kingdom Ireland Italy Germany Switzerland If you wish to connect the equipment to the PSTN in a country not listed above, you should contact your equipment supplier for further details.
  • Page 9 This equipment complies with the requirements of Directives 98/13/EC and 89/336/EEC, 73/23/EEC both amended by 93/68/EEC. Dieses Gerät entspricht den Anforderungen der EG-Richtlinien 98/13/EC und 89/336/EWG, 73/23/EWG mit Änderung 93/68/EWG. Ce matériel répond aux exigences contenues dans les directives 98/13/EC et 89/336/CEE, 73/23/CEE modifiées par la directive 93/68/CEE.

  • Page 10: Safety Precautions

    Safety Precautions General • Follow all cautions and instructions which may be marked on the computer. • Except as described elsewhere in this manual, refer all servicing to qualified personnel. Immediately shut off the computer and seek servicing under the following conditions: •...
  • Page 11 • Do not drop the computer nor hit it with other equipment. • Do not scratch the surface of the LCD screen. • Turn off the computer and disconnect the AC power cord before cleaning. Battery Pack Precautions Handling • Never put the battery pack in a fire, as it could explode and cause injury.
  • Page 12 Modem Precautions • Never install telephone wiring during a lightning storm. • Never install telephone jacks in wet locations unless the jack is specifically designed for wet locations. • Never touch uninsulated telephone wires or terminals unless the telephone line has been disconnected at the network interface.

  • Page 13: About This Manual

    Information in this manual is subject to change without notice and does not represent a commitment on the part of SHARP Corporation. SHARP Corporation shall not be liable for technical or editorial errors or omissions contained herein; nor for incidental or consequential damages resulting from the furnishing, performance, or use of this material.

  • Page 14: Recording Important Information

    Recording Important Information For future reference, please record the following information in the spaces provided below. Model Number: Serial Number: Date of purchase: Dealer’s Name: Place of purchase: Password: The serial number is printed on a sticker located on the bottom of the computer.

  • Page 15: Manual Conventions

    Manual Conventions This manual uses a set of style conventions described below. Notes and Cautions are italicized with icons: A note icon informs you of a special technique or information that may help you perform a task or better understand a process. A caution icon alerts you to something that may cause problems or damage to hardware, software or data.

  • Page 16: Quick Setup

    CHAPTER 1 Quick Setup Your computer is designed and pre-configured for easy setup and use. This chapter describes the steps to get your computer up and running as quickly as possible. Read this chapter first. Turning Power On Your computer is powered with either the rechargeable battery or AC power. See the next chapter for more information on power sources.
  • Page 17 Slide the battery stoppers to the lock position. Battery Stopper Place the computer upside down and plug the AC adapter cable in the plug on the right side of the computer. Plug the AC power cord into the AC adapter. •...
  • Page 18 Slide the display lock latch until the screen cover releases, and raise the cover. Tilt the cover to a comfortable viewing position. Slide the power switch located on the right side of the computer. When you turn on the computer, the power indicator ( ) turns green, the computer goes through a self test to detect any problems, and Windows 98 starts.

  • Page 19: Setting Up Windows 98

    Setting up Windows 98 The first steps in the setup process are as follows: • Entering your name • Registering your computer • Accepting license agreement • Completing configuration To set up Windows 98, follow the instructions on the screen. See also the Windows 98 manual.

  • Page 20: Shutting Down The System

    Shutting Down the System To turn off the computer: From the Start menu, select Shut Down. Select Shut down and click OK. The computer turns off automatically. Or you can turn off the computer with the power switch. Before turning off the computer with the power switch, follow the steps below: From the Start menu, select Settings –...

  • Page 21: Basic Operations

    CHAPTER 2 Basic Operations This chapter describes the basic operations of your computer. Choosing Power Source You can use the computer with one of the following power sources: • AC power from a wall outlet Use AC power whenever possible; rely on the battery only when AC power is not available.
  • Page 22 • When the battery is hot, the battery charge indicator may turn off even if the battery is being charged. • For more information on System Standby, see Chapter 3. Using the AC Adapter When connected to a wall outlet, the AC adapter provides power for operation and charges the battery.

  • Page 23: Resetting The System

    Resetting the System You may need to reset the system after adding hardware or software so that your computer will recognize the newly installed devices or software. When the message appears after the installation, click OK, Yes, etc. to restart Windows 98. You can also restart Windows 98 from the Start menu.

  • Page 24: Using The Glide Pad

    Using The Glide Pad Your computer is equipped with an integrated pointing device called a glide pad. Using the glide pad, you can move the pointer, select an item from a menu, and perform other tasks in the same way you would with a mouse. •...
  • Page 25 Click, Double-click, and Right-click To click or double-click, you can use the left button just like that of a mouse. Instead of clicking the left button, you can also just tap gently anywhere on the rectangular pad. For right-clicking, you must use the right button. Drag and Drop You can move icons or windows by using “drag and drop”...

  • Page 26: Using The Keyboard

    Using The Keyboard Your computer, equipped with the Windows Enhanced Keyboard, provides all the functionality of a full-sized desktop keyboard. Windows Logo Keys Opens the Windows Start menu. Opens an application-specific short-cut menu equivalent to right- clicking. System Function Keys When pressed together with the Fn key, function keys set specific system parameters.
  • Page 27 Quick Start Buttons The five buttons above the function keys are called “Quick Start Buttons”. You can set the buttons for specific applications and run the applications by simply pressing the buttons. Quick Start Buttons From the Start menu, select Program-Quick Start Button-Configuration to show Quick Start Button Utility dialog box.

  • Page 28: Using External Floppy Disk Drive Unit

    Using External Floppy Disk Drive Unit You can use double-density (2DD) 720KB or high-density (2HD) 1.44MB floppy disks with the external floppy disk drive unit. Connecting External Floppy Disk Drive Unit • Do not place the floppy disk drive unit on its side or upside down. •...
  • Page 29 Handling Floppy Disks • Do not open the shutter and touch the disk inside; otherwise, you will not be able to read or write data to the disk. • Do not place floppy disks near magnets or heat source, in direct sunlight or in a dusty place, etc.
  • Page 30 Removing Before removing the floppy disk, make sure the indicator of the floppy disk drive unit is not lit. Press the eject button firmly. The disk will pop out slightly. Remove it and store it properly. Formatting a Floppy Disk Make sure the floppy disk is not write-protected, and insert it into the floppy disk drive.

  • Page 31: Using Cd

    Using CD Compact disc (CD) is a storage medium, with which you can read data, play music, install and run programs, etc. The CD-ROM drive can be connected to the CD- ROM drive unit port on the right side of the computer. Turn off the computer before connecting/disconnecting the external CD- ROM drive unit;...
  • Page 32 Removing Optional External CD-ROM Drive 1. Remove the CD from the CD-ROM disk drive. 2. Turn off the computer. 3. Disconnect the CD-ROM disk drive unit by pulling out the connector. Handling CDs • Do not write on either side of the disc, particularly the non-label side. Data is read from the non-label side.
  • Page 33 Place your CD, label side up, on the tray. Slightly press the center of the CD until it clicks into place. Gently push the CD tray back into the CD-ROM drive unit. • When inserting a CD, do not use force. •...

  • Page 34: Battery And Power Management

    CHAPTER 3 Battery and Power Management This chapter explains how to manage the computer’s power effectively and use the standard battery or an optional battery pack. Standard Battery Pack When not connected to an external power source, your computer operates with the rechargeable standard battery pack.
  • Page 35 Checking the Battery Level You can check the battery level in the Power Management Properties dialog box in the Control Panel or double-clicking the battery or AC plug icon on the taskbar. You can also check with the battery indicator on the front side of the computer. Battery Indicator Press the button on the right of the battery indicator to show the battery power...
  • Page 36 When the standard battery is not installed in the computer, you can check the remaining capacity with the battery indicator on bottom of the standard battery. Press the button on the right of the indicator. The status of the indicator is the same as that on the front side of the computer.
  • Page 37 Charging the Battery Pack Connect the AC adapter to the computer. While the battery is being charged, the battery charge indicator is orange and the battery indicator turns on. When the battery is fully charged, the battery charge indicator turns green and the battery indicator turns off.

  • Page 38: Optional Batteries

    Optional Batteries To power your computer for extended periods of time, there are two available optional batteries, the high capacity battery pack (CE-BL10) or the sheet battery (CE- BP02). • Use only the appropriate optional battery (CE-BL10 or CE-BP02), and attach it correctly. •...
  • Page 39 Connect the high capacity battery pack to the computer the way the standard battery pack is connected. Make sure you direct the notched parts on both sides of the high capacity battery pack to the projected parts on the computer. If you hear a clicking sound, the high capacity battery pack should be correctly connected.
  • Page 40 Removing High Capacity Battery Pack Turn off the computer and the peripheral devices. Remove the AC adapter and peripheral devices. Place the computer upside down. Slide the battery stopper outward to the “unlock” position. Battery Stopper Slide the battery release lever outward to the “unlock” position and keep pressing it.
  • Page 41 Battery Indicator Initializing the High Capacity Battery Pack You can initialize the high capacity battery pack in the same way as the standard battery pack. It will take about 3.5 hours to fully charge it, and about 4 hours to discharge in the initializing process.
  • Page 42 Sheet Battery Connector Protection Shield Projections Place the computer upside down and tighten the screws clockwise. Checking the Battery Level Press the button to show the battery power remaining. Indicator Or you can check the power remaining with AC plug icon on the task bar. The status of the indicator is the same as that of the standard battery.
  • Page 43 Initializing Sheet Battery You can initialize the sheet battery in the same way as the standard battery pack, but you cannot initialize the sheet battery only. The standard battery will be initialized at the same time if you start initializing process. It will take about 5 hours to fully charge them, and about 2.7 hours to discharge in the initializing process.

  • Page 44: Power Management

    Power Management Power management saves electricity and extends battery life by controlling power supply to built-in devices. You can set the following power management properties in Windows 98. • Stopping power supply to the hard disk • Stopping power supply to the display •...
  • Page 45 restores the exact last state of the computer. There are two types of System standby; Standby and Hibernation. In Windows 98, you can define which System standby the system enters under what conditions. • Standby stores the current condition of the computer in RAM and stops power supply to all but a few essential components.
  • Page 46 Your computer enters System standby in each of the following cases: • You select Stand by in the Shut Down Windows dialog box. • The specified time in System standby in Power Schemes tab of Power Management Properties dialog box has passed without any operation. In the above two, your computer enters Standby or Hibernation depending on your selection in Selecting System Standby Mode of this chapter.
  • Page 47 Resuming from Standby Do not operate the keyboard, glide pad or mouse while the system is resuming from Standby. Your computer resumes from Standby in each of the following cases: • You press any key. • You slide the power switch. •...
  • Page 48 Battery Alarm In Windows 98, the alarm will tell you when the battery drops to the specified level by sounding an alarm or displaying a message, and let your computer go on System standby or be shut down automatically. From the Start menu, select Settings – Control Panel. Double-click Power Management icon.

  • Page 49: Peripherals

    CHAPTER 4 Peripherals This chapter describes how to use peripheral devices with your computer. You can connect a printer, external monitor, external keyboard, mouse, or other device to the computer. To ensure proper use, be sure to read the instructions for each peripheral device before connecting it to your computer.
  • Page 50 Peripheral Connection Overview CRT Monitor Floppy Disk USB Device Drive Unit CD-ROM USB Device Floppy Disk Drive Unit Microphone Audio Equipment...

  • Page 51: Keyboard / Mouse

    Keyboard / Mouse You can connect a USB keyboard or a USB mouse to the USB port of your computer. You cannot use a USB keyboard/mouse in MS-DOS mode. Display You can use an external monitor with your computer. To display images on both displays simultaneously, use the 1024x768 resolution.
  • Page 52 • Although you can switch the display with Fn+F5, use the above procedure in normal use. • While playing video or animation, you may not be able to switch the display. • While using multiple displays, you cannot switch the display. Changing Resolution and Number of Colors When shipped, your computer is set to the default resolution and color.

  • Page 53: Audio System

    Using Multiple Displays You can use multiple displays when an external display is connected. See Windows Help for more information. Audio System You can output sound to speakers or headphones. Connecting Audio Equipment Use the following audio cable for the connection: To output the computer’s audio signal to audio equipment: You can adjust the volume in Windows 98 by clicking the speaker icon in the taskbar or with the volume control dial on the front side of your...

  • Page 54: Usb Device

    To record sound from CD with an audio equipment compliant to SPDIF: From the Start menu, select Settings-Control Panel. Double-click Multimedia icon. Click CD Music tab. Select the drive you will use in Default CD-ROM drive for playing CD music. Check Enable digital CD audio for this CD-ROM drive, and click OK.
  • Page 55 Place the target device so that its IR port is in line with that of your computer. Adjust the distance between the IR ports to be less than 20 inches (50 cm). When using a Sharp electronic organizer, make sure the two IR ports are within 12 inches (30.5cm).
  • Page 56 Logical Port For some software, you may have to change the assignment of the logical port: In the SHARP IR dialog box, select Ports. Change the settings, and click OK. When the message You have changed the infrared communication port appears, click OK.
  • Page 57 Communicating with Windows 98 Personal Computer To communicate with a personal computer installed with Windows 98: Right-click the file you want to send. Select Send To - Infrared Recipient. The file you send will be saved in My Received Files in C: drive of the target personal computer.
  • Page 58 Built-in Modem (may not be available in some countries) You can use the built-in modem for data transfer and fax communication. • The built-in modem on your computer is designed only for regular analog telephone lines. The modem may be damaged when connected to a digital ISDN terminal or a digital PBX.
  • Page 59 Disabling Power Management To use communication software, you may have to disable power management. See Disabling Power Management in Chapter 3. Setting Communication Information In the Modems Properties dialog box, select Dialing Properties. Set each item, following the instructions on the screen. Setting Communications Software Within the communications software you are using, set the COM port of the built-in modem to COM3.
  • Page 60 LAN unit Your computer is equipped with a 100 Base-TX/10 Base-T LAN interface. To activate the LAN adapter, perform the following steps. Turn off the computer. Remove the cover of the LAN jack on the left side of your computer. Connect one end of the LAN cable into the LAN jack.
  • Page 61 If you cannot access the network, From the Start menu, select Settings – Control Panel. Double-click the Network icon. In the Network dialog box, select Configuration tab. Click Realtek RTL8139xxxx; then Properties. Click Advanced tab, and select Link Speed/Duplex Mode in Property: and enter an appropriate value in Value:.
  • Page 62 CHAPTER 6 Hardware Expansion This chapter describes how to use PC cards and increase memory of your computer. PC Card Your computer is equipped with a PC card (PCMCIA) slot, which can accommodate one Type II card. Before inserting a PC card into your computer, refer to its manual. Inserting PC Card Push the PC card eject button twice.
  • Page 63 Insert the card into the slot with the label face up until it locks into place. (You do not have to power down the computer to insert/remove PC cards when using Windows 98). When a new card is correctly inserted, the appropriate driver is automatically installed.
  • Page 64 Memory Module You can expand the memory size by installing a memory module. For available memory modules, ask your local dealer. You can see the current memory size in the System Properties dialog box. Installing a Memory Module • Do not handle the memory module where static electricity is easily generated such as on the carpet.
  • Page 65 Open and remove the RAM board slot cover. RAM Board Slot Align the memory module as shown below, matching the notched part of the memory module with the projected part of the memory socket on the computer. Notched Notched Projected Part Projected Part...
  • Page 66 Push the memory module into the slot firmly at an angle of about 20 degrees. RAM Board 20 ° RAM Board Slot Gently push the memory module down until you hear a clicking sound. Replace the RAM board slot cover and tighten two screws. Screws RAM Board Slot Cover Turn on the computer and check the memory size with the following procedure:...
  • Page 67 Uninstalling a Memory Module Follow steps 1- 4 of Installing a Memory Module. Slightly bend the two latches outward until the memory module is released. Remove the memory module and follow from step 8 of Installing a Memory Module.
  • Page 68 CHAPTER 7 Security Features This chapter describes how to protect your computer against unauthorized use, computer viruses and theft. Passwords Setting a password will help protect against unauthorized access to your computer. When a password is set and enabled in the Setup Utility, the system will require a password when the computer is turned on or resumes from Hibernation.
  • Page 69 Setting the Password In the Security menu of the Setup Utility, select System Password and press Enter. Type your password (up to eight characters), and press Enter. Type the same password again, and press Enter. Click Enable Password and press Enter. Click Exit and select Save Changes and Exit.
  • Page 70 Preventing Infection of Computer Viruses You can enable the item Virus Alert in the Security menu of the Setup Utility. The virus warning message appears if the sector of bootable disk has been changed. You can also protect against some viruses by limiting writing to the hard disk. To limit writing to the hard disk, enable the item BootSector Protect in the Security menu of the Setup Utility.
  • Page 71 CHAPTER 8 Setup Utility This chapter describes how to run the Setup Utility to change settings on your computer. Running the Setup Utility With the Setup Utility, you can customize the system configuration information, such as time and date, port assignments, or passwords. The information you have specified is saved in a special area called CMOS RAM, which the system reads every time you turn on the computer.
  • Page 72 Entering and Exiting the Setup Utility 1. Turn on the computer. 2. When Press <F2> to enter System Configuration Utility appears, press F2. 3. Change the desired settings. 4. Click Exit to select the Exit menu. 5. Select one of the exit methods, and press Enter. 6.
  • Page 73 Main menu Date and Time defines the system date and time, using the format month/day/year and hour: minute: second (24-hour format). The "↑" and "↓" keys move the cursor, and the space bar and the "-" key change numerals. IDE Settings defines IDE adapter among the following items: Standard, Fast PIO, Multiword DMA, and Ultra DMA-33.
  • Page 74 Advanced menu Ir Mode specifies the IR mode: ASK, or IrDA 1.0, or IrDA 1.1. Set to IrDA 1.1 during normal use. SaveToDisk Warning Message defines whether the warning message appears after the system restarts if there is no suspend-to-disk partition in the hard disk. Keyboard Numlock defines whether the numlock keys of the built-in keyboard is always disabled or not.
  • Page 75 Security menu See the previous chapter about setting passwords. System Password defines the password (up to eight characters) for booting the computer. If you lose your password, you will be unable to access the computer or change the configuration. Make sure to select a password you will never forget, or write it down and protect it in a secure place.
  • Page 76 Power menu • See Chapter 3 about power management and the battery. • All items except Battery Low Warning Beep do not work in Windows Enable Power Management enables the power saving features of the computer. Regarding the power saving settings, choose one from the following modes: Max Performance sets the battery consumption to the highest values.
  • Page 77 Exit menu Save Changes and Exit saves the settings you have changed and exits the Setup Utility. Discard Changes and Exit exits the Setup Utility without saving the settings you have changed. Get Default Values returns the values of all items to the default. To exit, select one of the above items.
  • Page 78 Appendixes The appendixes contain additional information on the use and care of your computer. Maintenance and Care This appendix provides you with information on how to maintain the computer in excellent working condition. Cleaning the Computer Cabinet Apply a small amount of mild cleaning solution to a dry, lint-free cloth and wipe the cabinet with the cloth.
  • Page 79 Ventilation Openings Dust on the ventilation openings may cause overheating of the computer. Wipe the ventilation openings with a soft, dry cloth. Traveling with the Computer This computer is designed for portability. For safety and convenience when traveling, please follow these guidelines. •...
  • Page 80 Video External monitor port Others Two USB ports, two mini USB ports (for floppy disk drive unit) Infrared IR port (IrDA:115Kbps/4Mbps, SHARP ASK:9600bps) Modem (may not be available in some Data: 56Kbps (receive), 33.6Kbps (send), Fax: 14.4Kbps, countries) 100Mbps operation...
  • Page 81 Options (may not be available in some countries) High Capacity Battery Pack CE-BL10 Sheet Battery CE-BP02 External CD-ROM Drive CE-CD03...
  • Page 82 Troubleshooting This chapter describes how to troubleshoot computer problems. Common Problems Problems with your computer can be caused by something as minor as an unplugged power cord or as major as a damaged hard disk drive. The information in this troubleshooting section is designed to help you find and solve minor problems.
  • Page 83 Trouble when Starting Question: Why doesn't the power switch function? • Make sure the AC power cable is correctly connected to a live wall outlet. • If the computer is operating with batteries, batteries may be discharged. Connect the computer to a wall outlet. Question: Why doesn't Windows start? •...
  • Page 84 Trouble with Display See also the Display section in Chapter 4. Question: Why is the screen blank? • Press any key to see if any power management feature has turned off the screen to save power. • See the power indicator to check whether the computer is powered. •...
  • Page 85 Trouble with Hard Disk Question: Why can't I read or write data to/from the hard disk? • Confirm the drive and file names are correct. • Confirm the hard disk has sufficient free space. • The hard disk in your computer is formatted with FAT32. You cannot read or write data formatted in other operating systems, which are not FAT 32 compatible.
  • Page 86 Question: Why doesn’t the CD-ROM drive open? • Confirm the computer is turned on. • After turning off the computer, insert a fine rod such as the end of a paper clip into the CD tray eject hole on the CD-ROM drive unit. For the location of the hole, see the section Using CD.
  • Page 87 These ports should be no more than 20 inches (50 cm) apart without any obstacles. • Confirm that IR communication is not turned off in the Sharp IR dialog box. • Confirm the item Ir Mode is set to the right mode in the Advanced menu of the Setup Utility.
  • Page 88 Question: Why can't I access the network? • Confirm the cable is properly connected to the LAN jack and the network hub. • Confirm the network configuration is appropriate. • Confirm the user name or password is correct. Other Troubles Question: Why is the date and/or time incorrect? •...
  • Page 89 Index formatting, 2-10 handling, 2-9 inserting, 2-9 AC adapter, 2-2 removing, 2-10 audio, 4-5 glide pad backing up data, 2-10 changing the configuration, 2-5 battery alarm, 3-15 using, 2-4 battery pack changing, 3-4 charging, 3-4 checking the battery level, 3-2; 3-7; 3-9 high capacity battery pack, 3-5 hibernation low battery indication, 3-3...
  • Page 90 installing, 6-3 Setup Utility uninstalling, 6-6 Advanced menu, 8-4 microphone, 4-5 entering and exiting, 8-2 modem, 5-4 Exit menu, 8-7 Main menu, 8-3 Power menu, 8-6 running, 8-1 Security menu, 8-5 password using, 8-2 changing, 7-2 sheet battery deleting, 7-2 connecting, 3-8 setting, 7-2 initializing, 3-10...

This manual is also suitable for:

Pc-ax10

Table of Contents