Preset Stations; Recalling A Stored Station; Drc (Dynamic Range Compression); Prune - Hitachi AXM1204E Instruction Manual

Preset Stations

You can store up to 30 of your favourite stations to the memory. This will enable you to
access your favourite stations quickly and easily.
1. To store a preset, you must first be listening to the station that you would like to save,
press and hold (tap and hold) MEMORY. The "Preset Store <#: (Empty)>" will show on
the display.
2. Press (tap)
GB
MOnO/ST. to confirm.
3. The station will be stored and the screen will then show "Preset # Stored".

Recalling a Stored Station

1. Once you have saved a station to one of the preset buttons, you can recall it by pressing
(tapping) MEMORY.
2. Press (tap)
3. Press SELECT/MOnO/ST. on the remote control to confirm the selection.
• The stored stations will be saved into the memory and power off will not erase it. Storing a
new station into a preset location will erase the previously stored station in that location.
• While the unit is in Standby mode, press and hold (tap and hold)
preset memory.

DRC (Dynamic Range Compression)

If you are listening to music with high dynamic range in a noisy environment, you may wish
to compress the audio dynamic range.
1. During DAB mode, press and hold (tap and hold)
2. Press (tap)
setting.

Prune

You may remove all unavailable stations from the list.
1. During DAB mode, press and hold (tap and hold)
2. Press (tap)
22
to select your desired preset station number and then press SELECT/
to select your desired preset station number.
to select <DRC>. Press SELECT/MOnO/ST. to confirm.
to select DRC high/low/off. Press SELECT/MOnO/ST. to confirm the
to select <Prune>. Press SELECT/MOnO/ST. to confirm.
to select <YES> to confirm delete. Or select <nO> to cancel.
/ MEnU to erase all the
/ MEnU, and then press (tap)
/ MEnU, and then press (tap)