Cleaning And Care; Cleaning With The Brush - Silvercrest SRR 3.7 A1 Operating Instructions Manual

Cleaning and care

DANGER – ELECTRIC SHOCK!
► Before cleaning the appliance, disconnect the power plug
from the mains power socket! There is a risk of electric shock!
CAUTION! MATERIAL DAMAGE!
► Do not use abrasive, chemical or caustic cleaning agents to
clean this appliance. This will irreparably damage the appliance.

Cleaning with the brush

Shaver unit
Clean the 3 shaving heads in the shaver unit 2 after every shave
using the brush t.
1) Press the release button 3 so that the shaver unit 2 pops open.
2) Tap the shaver unit 2 on a fl at surface or blow off the hair
cuttings.
3) Use the brush t to remove any remaining hair cuttings.
Trimmer unit
Clean the trimmer unit after every use with the supplied brush t.
■
Oil the long hair trimmers 6/8 around every 6 months with a
■
drop of sewing machine oil.
SRR 3.7 A1
GB
13