Assembly And Connecting To Propane Tank - Ooni Koda Essentials Manual

Assembly and connecting to propane tank

1
Setting up Ooni Koda is as
easy as 1, 2, 3 and can be
done in less than 5 minutes.
1 Remove Ooni Koda from
packaging including the
stone baking board sleeve
2 Unfold the legs
3 Connect to gas
Please refer to your manual
for country specific
instructions
8
2 3
Patio gas regulator (UK)
This is a push-on gas fitting. Ensure that the
black switch is in the horizontal position.
Depress the button located below the black
switch and press the regulator on to the tank
valve until it locks into place.
QCC1 (US, Canada)
This is a clockwise threaded gas fitting.
Ensure the tank is fully turned off and screw
the regulator on to the propane tank valve
fitting until tight.
POL (Australia and Europe)
This gas fitting is counter-clockwise. Make
sure that the tank is completely switched off
and screw the regulator as far as possible into
the propane tank valve.
Tank connection type will vary by region.
9