Advertisement
Quick Links
1W1B_QuickCard line.indd 1
QUICK START CARD
Tap this button for 1 second to lock your doors and/or arm your vehicle.
Tap this button twice within 1 second to unlock your doors and/or disarm
your vehicle.
Hold this button for 3 seconds to start your vehicle. Your vehicle's parking lights
will flash once and/or siren will chirp once for confirmation. Repeat and your
vehicle will shut off.
Valet Mode: If your remote start is not working, you may be in Valet Mode. Your parking
lights will also not flash. Your doors will still lock and unlock. To exit Valet Mode, turn the
vehicle's ignition On and then tap this button 5 times, waiting a second between each tap.
Your vehicle will flash the parking lights twice and exit Valet Mode. You can also exit Valet
Mode by turning the ignition On and then tapping the foot brake 10 times or reprogramming
your remote(s).
8102REUCL000100 // FT-1B Guide REV1
RF-1WR3R-AM
2013/6/6 9:28:50
Advertisement
Related Manuals for CompuSTAR RF-1WR3R-AM
Summary of Contents for CompuSTAR RF-1WR3R-AM
- Page 1 8102REUCL000100 // FT-1B Guide REV1 QUICK START CARD RF-1WR3R-AM Tap this button for 1 second to lock your doors and/or arm your vehicle. Tap this button twice within 1 second to unlock your doors and/or disarm your vehicle. Hold this button for 3 seconds to start your vehicle. Your vehicle’s parking lights will flash once and/or siren will chirp once for confirmation.
- Page 2 Questions/comments? Contact us at 888-820-3690 from 8 programming mode and you must retry. AM to 5 PM PST. Also please visit www.compustar.com for a Register online at www.compustar.com within 10 days of purchase to complete user’s manual.
Need help?
Do you have a question about the RF-1WR3R-AM and is the answer not in the manual?
Questions and answers
Mazda lights activate but the motor does not start. Held for 3 seconds and the second [ right hand ] light flashes. HELP
The CompuSTAR RF-1WR3R-AM remote start may not be starting the motor but activates the Mazda lights because the vehicle could be in Valet Mode. In Valet Mode, the remote start function is disabled, though the parking lights may still flash. To exit Valet Mode, turn the vehicle's ignition On and tap the remote's button 5 times, waiting a second between each tap. The parking lights will flash twice as confirmation that Valet Mode is deactivated. Alternatively, you can exit Valet Mode by turning the ignition On and tapping the foot brake 10 times or reprogramming the remote(s).
This answer is automatically generated
@Mr. Anderson
@Mr. Anderson We changed the batteries in a futile attempt to get the remote working properly. We did try the Valet mode. Now we can get the car started, however it shut off after 2 minutes [ approximately ]
The starter is not working
The CompuSTAR RF-1WR3R-AM starter might not be working because the system is in Valet Mode. In Valet Mode, the remote start will not function, and the parking lights will not flash, although the doors will still lock and unlock. To exit Valet Mode, you can:
1. Turn the vehicle's ignition On and tap the button on the remote 5 times, waiting 1 second between each tap. The parking lights will flash twice to confirm exit.
2. Alternatively, turn the ignition On and tap the foot brake 10 times or reprogram the remote(s).
This answer is automatically generated
COMPUSTAR MODEL 1WR3R-****-Robert Vangiesen