Operation - Bunker Hill Security LED-SOLAR Owner's Manual & Safety Instructions

Functions
Solar Panel
Mounting
Hole
Base

Operation

Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this
manual including all text under subheadings therein before set up or use of this product.
1. Move the Power Switch on the back of the Lamp to
"ON." This will activate the Solar Security Light.
2. The Light will automatically turn
on dimly during the night.
3. Test the Light by walking or driving
into the protected area.
Item 64733
Power
Cord
Figure B
For technical questions, please call 1-888-866-5797.
Lamp
Mounting
4. The Lamp should brighten temporarily
when motion is detected.
5. If the Lamp does not brighten, relocate or adjust
the aim of the sensor, or allow more charging time.
The Power Switch
and Power Input
Connection are on
the back of the Lamp.
Hole
Base
Page 5