Related Manuals for THRIVE AGRITECH Boost
Summary of Contents for THRIVE AGRITECH Boost
- Page 1 ___________________________________________________________________________ www.thriveagritech.com info@thriveagritech.com 800-205-7216...
-
Page 2: Table Of Contents
Table of Contents Introduction ............................2 General Guidelines ..........................2 Daisy-Chaining ............................2 Installation Instructions: Flush Mount ....................3 Installation Instructions: Suspension Mount ..................8 ___________________________________________________________________________ www.thriveagritech.com info@thriveagritech.com 800-205-7216... -
Page 3: Introduction
Introduction This manual provides installation instructions for Boost and Infinity 2.0 LED light bars for top lighting. For under canopy lighting, use “Installation Guide, Under Canopy Lighting” located on Thrive Agritech’s website. General Guidelines • Confirm the overall integrity of the light bars prior to installation. -
Page 4: Installation Instructions: Flush Mount
This guide provides installation instructions using a 4’x16’ canopy as an example. While your specific canopy may be a different geometry, the same general installation procedures apply. Please contact Thrive Agritech customer support with any questions not covered in this guide. - Page 5 Figure 1 shows the completed installation example of the lights (either Boost or Infinity 2.0) over a 4’x16’ canopy. The installation consists of 4 lines of lights, with each line containing 4 lights connected end-to-end for a total of 16 lights over the canopy.
- Page 6 1) Attach the Unistrut bars to the mounting surface as shown in Figure 2. The first two Unistrut bars of a line of lights should be approximately 36” apart, and all subsequent Unistrut bars should be about 47.25” apart. Unistrut Figure 2 36”...
- Page 7 4) Beginning with the Unistrut bars that are spaced 36” apart, secure the lights to the slide & lock clips as shown in Figure 6, but leave the locking arms disengaged to allow the lights to slide and connect with each other. Figure 6 Slide &...
- Page 8 5) Once the lights are connected end-to-end, make any final positional adjustments such as ensuring the ends of the lights are aligned. 6) Attach the interconnection clip as shown in Figure 7 to secure the lights mechanically and electrically. Figure 7 Interconnection Clip 7) Compress the locking arms of the slide &...
-
Page 9: Installation Instructions: Suspension Mount
Installation Instructions: Suspension Mount In some circumstances, customers may prefer to install Boost or Infinity 2.0 lights using suspension cables. Parts for Suspension Mount Installation Item Part Number Image Boost BST-130W-FS2 Infinity 2.0 TBAR-65W-FS2 Suspending kit SKIT-BD Interconnection Clips INCLIP-BD... - Page 10 (2) suspension clips can attach to the light bar approximately 6” from each end of the light. 5) Attach the Boost or Infinity 2.0 light bar to the suspension clips (Figure 11). Figure 11 ___________________________________________________________________________ www.thriveagritech.com...
- Page 11 6) The lights are frequently electrically and mechanically daisy-chained by mating the ends together. If creating end-to-end connections, attach an interconnection clip (INCLIP-BD) at the connection point between the lights – Figure 11. Figure 11 Interconnection Clip 7) Connect power cables to lights. Connect optional interconnection cables or dimming cables as needed.
Need help?
Do you have a question about the Boost and is the answer not in the manual?
Questions and answers