Playing Back Recordings From The Capture Drive - Canon CDX-36150 Manual

Recording

Playing Back Recordings from the Capture Drive

Press the camera's PLAY button to set the camera in playback mode. If you were recording on the CDX-36150
Recorder, information about the last clip recorded on the Capture Drive will be displayed on the control display.
During the playback of RAW clips, the [Canon Log 2] gamma, [Cinema Gamut] color space and [Neutral] color
12
matrix will be used.
?
Playback
To switch to playback from the Capture Drive after playing back recordings from other recording media:
1 From the PLAY screen, select the Capture Drive as the recording media to play back.
[PB MEDIA] > [
?
Selecting the Recording Media and Format to Play Back
Playback Video Configuration and Video Output Configuration by Terminal
Video configuration of the clip
[Playback Media]/
Resolution
[ Capture Drive (RAW)]
Z[ 4512x2376
Z[ 4512x1920
4096x2160
2048x1080 (cropped)
] 4272x2376
[ Capture Drive (ProRes)]
4096x2160
3840x2160
2048x1080
1920x1080
1
During the playback of sub recording (XF-AVC Proxy) clips, if the output of onscreen displays is activated for the MON. terminals,
the onscreen displays will be output also from the SDI OUT terminals.
2
[System Setup] > [Term. Output Setup] > [MON. Output] setting.
3
[System Setup] > [Term. Output Setup] > [MON. Output] is set to [Off], the HDMI OUT output will change
When
depending on the capabilities of the monitor used. When [MON. Output] is set to a setting other than [Off], if the monitor
connected to the terminal does not support the video output configuration, video output from the HDMI OUT terminal will be
turned off.
The color sampling will be set automatically to YCbCr 4:2:2, 10 bit, YCbCr 4:4:4, 8 bit or RGB 4:4:4, 8 bit, depending on the
capabilities of the external monitor.
4
[System Setup] > [Term. Output Setup] > [HDMI Max Res.] setting.
5
Only available when
NOTES
• During the playback of RAW clips, if the camera's onscreen displays are being output from the MON.
terminals, the onscreen displays will be superimposed also on video output from the SDI OUT terminals.
Capture Drive (RAW)] or [
Frame
1
SDI OUT terminals
rate
YCbCr 4:2:2, 10 bit
2048x1080
YCbCr 4:2:2, 10 bit
59.94P
YCbCr 4:2:2, 10 bit
50.00P
4096x2160
29.97P
YCbCr 4:2:2, 10 bit YCbCr 4:2:2, 10 bit
25.00P
24.00P
3840x2160
23.98P
YCbCr 4:2:2, 10 bit YCbCr 4:2:2, 10 bit
2048x1080 /
RGB 4:4:4, 12 bit
YCbCr 4:2:2, 10 bit
YCbCr 4:2:2, 10 bit
1920x1080 /
RGB 4:4:4, 12 bit
YCbCr 4:2:2, 10 bit
YCbCr 4:2:2, 10 bit
[System Setup] > [Term. Output Setup] > [SDI OUT Output] is set to [Off].
Capture Drive (ProRes)]
Video output configuration
MON. terminals
2
[MON. Output]
[2048x1080/
[1920x1080]
1920x1080]
2048x1080
1920x1080
2048x1080
1920x1080
YCbCr 4:2:2, 10 bit
1920x1080
2048x1080
1920x1080
3
HDMI OUT terminal
4
[HDMI Max Res.]
[4096x2160/
[1920x1080]
3840x2160]
–
1920x1080,
5
4096x2160
720x480 (59.94P),
720x576 (50.00P)
5
3840x2160
1920x1080,
720x480 (59.94P),
720x576 (50.00P)