Change Password; Local Management - Mercusys MR50G User Manual

To reset the router to factory default settings:
1. Click FACTORY RESTORE to reset the router.
2. Wait a few minutes for the restoring and rebooting.
Note:
• During the resetting process, do not turn off or reset the router.
• We strongly recommend you back up the current configuration settings before resetting the router.

5. 8. 3. Change Password

1. Visit http://mwlogin.net, and log in with the password you set for the router.
2. Go to Advanced > System > Administration, and focus on the Change Password
section.
3. Enter the old password, then a new password twice (both case-sensitive). Click
SAVE.
4. Use the new password for future logins.

5. 8. 4. Local Management

1. Visit http://mwlogin.net, and log in with the password you set for the router.
Chapter 5 Advanced Configuration
61