Related Manuals for Denver LDS-3276
Summary of Contents for Denver LDS-3276
- Page 1 User Manual ENGLISH Model: LDS-3276 To obtain the best performance and safety, please read this manual carefully. Please keep this manual for future reference.
-
Page 2: Table Of Contents
CONTENTS SAFETY INSTRUCTIONS ..............2 EXTERNAL SCHEMATIC AND INSTALLATION ........ 3 Antenna/Cable Connection ............4 REMOTE CONTROLLER ..............5 SOURCE .................... 6 BASIC OPERATION ................6 Initial Setup ................6 HOME Menu ................11 Setting ..................11 Picture ..................14 Sound.................. -
Page 3: Safety Instructions
SAFETY INSTRUCTIONS EXTERNAL SCHEMATIC AND INSTALLATION IMPORTANT SAFETY INSTRUCTIONS - PLEASE READ CAREFULLY BEFORE USE. The following safety instructions are located on the back of the TV. DANGER OF ELECTRIC SHOCK! NEVER REMOVE THE SCREWS OF THE COVER. NO USER-SERVICEABLE PARTS IN THE DEVICE. REPAIR ONLY BY QUALIFIED SERVICE PERSONNEL. -
Page 4: Antenna/Cable Connection
EXTERNAL SCHEMATIC AND INSTALLATION REMOTE CONTROLLER Antenna/Cable Connection a. Connect the Plug of the antenna cable or CATV cable to the cable (not provided with this unit), then connect to the antenna input of this unit for best reception. b. If the antenna cable in your home is other than the above two or you have problems in installing the antenna, please contact your dealer. -
Page 5: Basic Operation
ACCEPT Accept all agreements and agree to the firmware/software network to automatically download updates 3). If you select VIEW ADDITIONAL DETAILS, the detailed firmware/software network download update instructions will display. Initially, the default focus will be on the text description section. Press ▲▼the buttons will drop the text to the bottom. Press the ▼... - Page 6 DVB-T 2). Use ◄▲▼►buttons to navigate the keypad in the screen to entry your Wi-Fi 1) Input Source page shown on the TV, use the ▲▼buttons to select TV. Then press the password, then press the OK button to select the characters. Finally select the button to select the characters.
-
Page 7: Home Menu
3). Your TV will now start scanning for all the available TV channels. This operation may take a few minutes. The display will show the progress of the tuning and the number of channels found. Satellite Selects your desired satellite. Transponder Selects your desired frequency. - Page 8 through HDMI, by using only one of the remote controls (e.g. controlling a TV set, set-top box and DVD player using only the remote control of the TV). CEC also allows individual CEC-enabled devices to command and control each other without user intervention. Make sure that your CEC-compliant device is connected to your TV using a HDMI cable and the correct HDMI input source is selected prior to using this function.
-
Page 9: Picture
Sleep Timer The sleep timer automatically switches the TV to standby after the preset time has elapsed. The clock will be set automatically when receiving a digital signal. Time must be set before using Sleep Timer function. Press the ◄►buttons to select a period of time after which the TV automatically switches to standby mode: OFF / 10 / 20 / …... -
Page 10: Sound
● Set to “Off” for normal broadcasting sound coming out from speakers. Sound ● Set to “On” to activate the description sound track if available. Press the ◄►buttons to Allows you to select an audio-enhancement technique. adjust the AD volume. The availability of Audio Description sound track is indicated by the visually impaired icon "V.I."... - Page 11 Search Mode Selects the scanning method: BLIND SCAN / FAST SCAN. Search Start searching. 8). Your TV will now start scanning for all the available TV channels. This operation may take a few minutes. The display will show the progress of the tuning and the number of channels found.
- Page 12 Scan Mode DTV Manual Tuning (DVB-S Mode) Selects your desired watching channel type: Free + Scramble / Free / Scramble. Allows you to make manual fine tuning adjustments to the channel under DTV mode. 1). Press the 1). Press the button to display the main menu.
- Page 13 Search Symbol Press to start the manual tuning. Selects the symbol. Fine-Tune Modulation Press to make manual fine tuning adjustments. Selects the modulation. Save 5). When the signal has been tuned, the picture and signal strength will be displayed on the Save the setting.
- Page 14 according to the option or the configuration of DiSEqC switch box or antenna. Motor Select DiSEqC1.2 or DiSEqC1.3 then press the colored button to enter the submenu. Then use the ◄▲▼►buttons to advance settings. SingleCable Select and control of plural Satellite antennas through the combined single antenna cable. Use the ◄▲▼►buttons to advance settings.
-
Page 15: Lock
2). Insert the Common Access Module into the slot. Flip the Common Access Module to 6). Press the BACK button to return to the previous menu. Press the EXIT button to exit the another side and try again if you feel resistance. menu. -
Page 16: Pvr Option (Dtv Mode)
3). Press the ▲▼buttons to select following setting options. Press the OK button and then 3). Use the 0-9 buttons to input a 4-digit password to enter the LOCK menu. press the ◄►buttons to adjust each option’s setting. 4). Press the OK button to select Lock System. PVR File System Allows you to select your preferences in the PVR File System. -
Page 17: Network
Network Adjust all your network setting and check your connection if you are having connection problems. Display the connected wireless DNS. 1). Press the 1). Press the button to display the main menu. button to display the main menu. Ethernet Connect your TV to your network by connecting the LAN port on the back of your TV to an 2). -
Page 18: Other Information
Other Information Software Update (USB) 1). Press the 1). Press the button to display the main menu. button to display the main menu. This function is only for servicing purposes. 2). Press the ▲▼buttons to select About and then press the OK button. Internet Update Check Check and automatically update the software of NetReady. -
Page 19: Multimedia Operation
MULTIMEDIA OPERATION Button Functions in a 7-Day Guide Movies 1). Press the ▲▼buttons to select MOVIE and then press the OK button. Remote Control Button Function 2). If you have more the one devices connected, press the ◄►buttons to select your storage Press to select a channel and programme or switch between device and then press the OK button. - Page 20 Additional information is available at the technical department of your city. Hereby, Inter Sales A/S declares that the radio equipment type LDS-3276 is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: www.denver-electronics.com and then click the search ICON on...
Need help?
Do you have a question about the LDS-3276 and is the answer not in the manual?
Questions and answers