Empty and clean the ice cube con-
tainer at regular intervals, or at least
if you have not produced any ice for
longer than a week (see "Cleaning
and care – Emptying and cleaning
the ice cube container").
This will ensure that you always have
fresh ice and the ice cubes will not
form a clump.
Switching the Dispenser
unit off
Close the stopcock in the water sup-
ply line approx. 3 hours before
switching off the refrigeration appli-
ance to avoid the build-up of mould
caused by stagnant water.
In Settings mode , use the
and sensor controls to select
penser unit
and select OK to confirm
your selection.
Use the and sensor controls to
select
Off
and select OK to confirm
your selection.
The Ice/Water dispenser is now
switched off; the sensor controls in the
control panel are no longer highlighted
in white.
Operating the Ice/Water dispenser
Switching the system lock on/
off
You can use the system lock to protect
the Ice/Water dispenser from unauthor-
ised use, such as by children.
Touch the sensor control until it is
highlighted in white and a short tone
sounds.
The remaining sensor controls of the
Ice/Water dispenser are now locked
and cannot be selected.
To switch off the system lock, touch
the sensor control for approx.
3 seconds until it is no longer high-
Dis-
lighted in white and a short tone
sounds.
101