Related Manuals for AWS PC Series
Summary of Contents for AWS PC Series
- Page 1 American Weigh Scales PC-Series User Manual PC-201 (200g x 0.01g) PC-2000 (2000g x 0.1g) Copyright © 2014 American Weigh Scales, Inc. All rights reserved. Rev. 1.0...
- Page 2 PC-Series Manual Thank you for purchasing the American Weigh PC-Series digital pocket scale. Please read all operating instructions carefully before use. Scales are precision measuring devices and should always be handled with proper care. To ensure years of reliable service, keep these simple tips in mind: •...
- Page 3 I. Part List 1. Scale 2. Cover / Tray 3. AAA Batteries (x2) II. Key Description TARE ON/OFF MODE Unit Price Weight Total 1. TARE - Sets the displayed weight to zero 2. ON/OFF - Turns the scale on or off DC 5V 3.
- Page 4 PC-Series Manual Low batteries can cause inaccuracies in digital scales. If you are experiencing issues with your scale, first try new batteries. Most times, this will solve the problem. 1. Before using the scale for the first time, check the battery compartment and remove any plastic insulation strips or packaging that may be in place to prevent battery drainage during shipping/storage. 2.
- Page 5 VI. Using the Tare Feature You can use this scale’s tare feature to subtract the weight of an empty container or vessel for net weight determination. NOTE: The weight of the container will subtract from the available capacity (subtractive taring). 1.
- Page 6 PC-Series Manual VIII. Price Computing 1. Press the K key to select a unit price preset 2. Place the item to be weighed on the platform 3. The display will show the unit price, weight, and total price. 4. Press MODE if you wish to change the weighing unit IX.
- Page 7 the CAL key again to set the zero point. The LCD will flash “CAL” followed by the required calibration weight again (see chart on previous page). 3. Place the required weight on the center of the scale platform. The display will flash “PASS” then return to normal weighing. NOTE: PASS only indicates that calibration has completed and is not a confirmation that you have used the correct weight. 4.
- Page 8 PC-Series Manual problem persists, the load cell may be permanently damaged due to overloading. 2. O-Ld - Overload. The maximum capacity has been exceeded. Remove the extra weight to avoid permanently damaging the load cell. 3. Lo - Batteries are low. Replace the batteries. XIII.
Need help?
Do you have a question about the PC Series and is the answer not in the manual?
Questions and answers