Connecting Sicon-C To Siport 2 - SIGRIST-PHOTOMETER FireGuard 2 Instruction Manual

Operation
7.3

Connecting SICON-C to SIPORT 2

The SICON-C (2) is connected to the SIPORT 2 (1) on the connector (X). The protection cover
on the SIPORT 2 must be removed beforehand. If the SIPORT 2 is connected to the service
voltage, the SICON-C starts automatically.
Figure 18: Connecting the SICON-C to the SIPORT 2 with housing

The SICON-C has a touchscreen. Operation is made by touching the screen with your finger.
The navigation elements change color when touched.
Sensitive touchscreen.
The touch screen can be damaged through improper handling. Damage can be avoided
with the following measures:
▪
CAUTION!
▪
▪
13542E/5
SIPORT 2
Touch the touchscreen only with your fingers and not with sharp objects.
Use only slight pressure to perform manipulations on the touchscreen.
Do not use chemicals or solvents to clean the touchscreen.
Instruction Manual FireGuard 2

SICON-C
37