General Problems - Dell W2600 Owner's Manual

General Problems

Problem
Poor picture quality while watching wide LCD
monitor and using a device such as a DVD
player or a VCR
82
Troubleshooting Your Wide LCD Monitor
Possible Solution
Check the aspect ratio settings in the OSD. Press the
1
Menu button on the remote control and select Size. For
more information on using the OSD, see "Using the On-
Screen Display" on page 73.
Reconnect the device using the same type of connector.
2
For example, if you are using the composite connector
on the bottom, try connecting the device to the
composite connector on the side of the wide LCD
monitor . See "About Your Wide LCD Monitor" on
page 53 for the location of the connectors.
After you connect the device, change the input source in
the OSD. See "Input Select Menu" on page 74 for more
information.
Connect the device using a different connector. For
3
example, if you are experiencing the problem using a
composite connector, try using the component
connector.
NOTE:
To connect to a different connector, you need the
appropriate cables for that connector. See your device
documentation for a list of supported connections.
After you connect the device, change the input source in
the OSD. See "Input Select Menu" on page 74 for more
information.
Reset the original factory defaults. Press Menu on the
4
remote control, select Setup, and then select Factory
Reset.
Adjust the color temperature. Press Menu on the remote
5
control, select Picture, and then select Color
Temperature.
NOTE:
Some set top boxes offer aspect ratio. See your
device documentation for more information.