76
930-095000
SPECIAL EXTENDED
WARRANTY OFFER
5 YEARS FOR 5 DOLLARS
For $5, Timex will extend the enclosed one year limited manufacturer's
warranty for an additional 4 years from date of purchase. This 5 year
warranty covers repairs on your watch under the same terms and
conditions as set forth in the manufacturer's warranty in this booklet.
Payment can be made with AMEX, Discover, Visa or MasterCard by calling
1-800-448-4639 during normal working hours or you can mail a check to:
Timex Extended Warranty, P.O. Box 1676, Dept. EF , Little Rock, AR 72203.
We will need your name, address, telephone number, date watch
purchased and 5 digit watch model number.
Payment must be made within 30 days after date of purchase.
PLEASE READ THIS BOOKLET CAREFULLY to familiarize yourself with the
operation and care of your Timex watch and with the Limited Warranty.
You are now the owner of a Timex Combination Watch with these
sophisticated timekeeping features:
• ANALOG (HANDS) PORTION - Hours, Minutes, Seconds
• DIGITAL PORTION - Normal Time/Second Time Zone, Alarm/Hourly
Chime, Chronograph (Stopwatch), Countdown Timer, Calendar.
SECTION 1 – INDIGLO
Your Timex watch with INDIGLO night-light contains a patented
electroluminescent technology (U.S. Patent Number 4,527,096 and
4,775,964). The INDIGLO night-light illuminates the entire watch face (analog
and digital) with a uniform bright light that offers superior readability in all
low light and nighttime conditions. Simply press the INDIGLO night-light
button to activate.
INDIGLO is a registered trademark of Indiglo Corporation in the U.S. and other countries.
930-095000
INSTRUCTIONS
SPECIAL EXTENDED
WARRANTY OFFER
®
NIGHT-LIGHT
76
Your Timex watch is equipped with NIGHT-MODE
feature (U.S. Patent Number 4,912,688) enhances the benefits of the
INDIGLO
®
night-light. Once activated, any button pushed will cause the
INDIGLO night-light to stay on for 3 seconds. NIGHT-MODE is activated by
pressing and holding the INDIGLO night-light button for 3 seconds. The watch
will beep, indicating that NIGHT-MODE is activated. NIGHT-MODE will stay
activated for 3 hours or until you deactivate it by pressing and holding the
INDIGLO night-light button again for 3 seconds.
EXAMPLE: When running lap time in low light conditions, press
START/SPLIT. At this time, the INDIGLO night-light will automatically stay
on for 3 seconds, allowing you to read the lap or split time...all with one
simple push of a button.
If your watch is water-resistant, it will be indicated (
or on the caseback.
• 30 Meter Water-Resistant watch withstands water pressure to 60 p.s.i.a.
(equals immersion to 98 feet or 30 meters below sea level).
• 50 Meter Water-Resistant watch withstands water pressure to 86 p.s.i.a.
(equals immersion to 164 feet or 50 meters below sea level).
• 100 Meter Water-Resistant watch withstands water pressure to 160
p.s.i.a. (equals immersion to 328 feet or 100 meters below sea level).
WARNING: TO MAINTAIN WATER-RESISTANCE, DO NOT PRESS ANY
BUTTONS OR PULL OUT THE CROWN UNDER WATER.
NOTES:
1. The watch is water-resistant only as long as crystal, push buttons/crown
and case remain intact.
2. Even though the watch may be water-resistant to a significant depth (100
or 200 meters), it is not a diver watch and should not be used for diving.
3. Timex strongly recommends rinsing your watch with fresh water after
exposure to salt water.
• Shock-Resistance: If your watch is shock-resistant, it will be indicated on
the watch face or caseback. Timex shock-resistant watches are designed
to pass the FTC test for shock-resistance. However, care should be taken
to avoid damaging the crystal.
The following illustrations show you the various buttons and their location
for operating and setting your watch.
SECTION 2 – NIGHT-MODE
®
OPTION
SECTION 3 – WATER-RESISTANCE
®
. This Timex patented
) on the watch face
Need help?
Do you have a question about the INDIGLO Series and is the answer not in the manual?
Questions and answers
how to change day of week
To change the day of the week on a Timex INDIGLO Series watch:
1. Press the MODE button repeatedly until NORMAL TIME is displayed.
2. Press and hold the SET button until the SECONDS begin to flash.
3. Press the MODE button to cycle through the settings until the DAY is selected.
4. Press the START/SPLIT button to advance the day.
5. Exit the setting mode by pressing the SET button.
This answer is automatically generated
The night light feature has stopped aluminating. The watch is working fine otherwise.
If the NIGHT-MODE® or INDIGLO® night-light feature is not working properly on your Timex INDIGLO Series watch, try the following steps:
1. Activate NIGHT-MODE®: Press and hold the INDIGLO night-light button for 3 seconds. The watch will beep, indicating activation. The night-light will stay on for 3 seconds with any button press for the next 3 hours.
2. Deactivate and Reactivate: If NIGHT-MODE® is already on but not functioning correctly, press and hold the INDIGLO night-light button again for 3 seconds to turn it off. Then, reactivate it using the same procedure.
3. Check Battery: If the battery is depleted, the night-light may not function. Replace the battery promptly with the type indicated on your caseback.
4. Inspect for Damage: If the watch crystal is damaged, it may affect the module’s function. Have it replaced if necessary.
5. Service the Watch: If the issue persists, send the watch to Timex Service at HOTLINE WATCH SERVICE, P.O. Box 2740, Little Rock, AR 72203.
Following these steps should help restore the night-light function on your Timex INDIGLO Series watch.
This answer is automatically generated
how to change from Military to Standard Time