Display Language; System Language - Icom IC-705 Basic Manual

8
SET MODE
Display
» SET > Display

Display Language

LThis item is displayed only when the "System
Language" item is set to "Japanese."
Sets the screen display language type to
English or Japanese.

System Language

Sets the system language of the transceiver.
• English: The system language of the
transceiver is English.
Only alphabetical characters (A to
Z, a to z, 0 to 9) and symbols (! "
# $ % & ' ( ) * + , - . / : ; < = > ? @
[ \ ] ^ _ ` { | } ~) can be displayed.
If Japanese characters (Kanji,
Hiragana, and Katakana) are
included, the display shows "=" or
"_" instead of that character. In that
case, you can only delete "=" or "_"
in the transceiver's edit mode.
• Japanese: The system language of the
transceiver is Japanese.
Kanji, Hiragana, and Katakana
characters, and the 2-bytes
symbols can be displayed. To
display such characters in the
DR screen or Menu mode, set
"Display Language" to "Japanese."
LWhen this item is set to "English," "Display
Language" is not displayed.
(Default: English)
(Default: English)
8-17
When you set the system language of the
transceiver to Japanese, the transceiver has the
capability to display both English and Japanese
characters. HOWEVER, if you select Japanese,
all menu items throughout the transceiver system
will be displayed in only Japanese characters.
There will be no English item names. Unless you
are fluent in reading Japanese characters, use this
feature with extreme caution.
If you have change the transceiver's language to
Japanese and do not understand the menu system
in the new setting, you will have to change the
language back to English by doing a partial reset
of the transceiver CPU. A partial reset will not clear
your call sign databases.
To do a partial reset of the CPU, do the following steps:
1. Push .
2. Touch [SET].
3. Touch the item (with the "etc" icon) shown below.
4. Touch the bottom item shown below.
5. Touch the upper item shown below.
6. Touch the left item.
• The transceiver displays "PARTIAL RESET,"
then the partial reset is completed.