Dell Dimension XPS Manual page 4

Hide thumbs Also See for Dimension XPS:

Table of Contents

Documentation

NOTICE:

To avoid breaking the memory module, do not press near the middle of the

module.

7. Insert the module straight down into the connector, ensuring that it fits into the vertical guides at each end of the

connector. Press firmly on the ends of the module until it snaps into place.

If you insert the module correctly, the securing clips snap into the cutouts at each end of the module.

Close the computer

cover.

NOTICE:

To connect a network cable, first plug the cable into the network wall jack and then plug it into the

computer.

9. Connect your computer and devices to electrical outlets, and then turn them on.

10. Click the Start button, right-click My Computer, and then click Properties.

11. Click the General tab.

12. To verify that the memory is installed correctly, check the amount of memory (RAM) listed.

http://support.dell.com/support/edocs/systems/dimxpsg2/en/SM/parts.htm (4 of 37) [3/26/2008 3:57:09 PM]

Table of Contents