Software Update; Update Procedure - Samsung HW-T400 Full Manual

10 SOFTWARE
UPDATE
Samsung may offer updates for the Soundbar's
system firmware in the future.
If an update is offered, you can update the
firmware by connecting a USB device with the
firmware update stored on it to the USB port on
your Soundbar. For more information about how
to download update files, go to the Samsung
Electronics website at (www.samsung.com 
Support).
Then, select the product type or enter the model
number of your Soundbar, select the Software &
Apps option, and then Downloads. Note that the
option names can vary.
Bottom of the Soundbar
USB (5V 0.5A)

Update Procedure

Important: The updating function erases all user
settings. We recommend you write down your
settings so that you can easily reset them after
the update.
1. Connect a USB thumb drive to the USB port
on your computer.
Important: Make sure there are no music
files on the USB thumb drive. This may cause
the firmware update to fail.
2. Go to the Samsung website at (samsung.
com) select Enter Model Number and

enter the model of your Soundbar. Select
manuals and downloads and download the
latest software file.
3. Save the downloaded software to a USB
stick and select "Extract Here" to unzip the
folder.
4. Turn off the Soundbar and connect the USB
stick containing the software update to the
USB port.
5. Disconnect the power cord, reconnect it, and
then turn on the Soundbar.
6. Turn on the Soundbar and select mode to
USB. Within 3 minutes, 4 white LEDs on and
update begins.
7. When the update finishes, the Soundbar
turns off. Press the
remote control for 5 seconds. All LEDs blink
2 times and then the Soundbar turns off.
The update is complete.
• If the firmware fails to update, you can
update the firmware again.
8. Restore your settings on the Soundbar.
ENG - 31
button on the