Filling The Water Tank - Whirlpool ACE 010 Installation, Quick Start


R by pulling it out (to-
EMOVE THE WATERTANK
wards the front).

F with fresh
ILL THE TANK
clean water taking care
not to exceed the MAX
level. Refit the tank.
F , the appliance has
OR ENERGY SAVING PURPOSES
an automatic switch-off function (the power
light goes off), if it is not used for a long peri-
od of time.
T , position it under the
O ATTACH THE FILTER HOLDER
boiler outlet
with the han-
dle towards
the left,
push it
upwards
and at the
same time rotate the
handle firmly towards the right.
FILLING THE WATER TANK
AUTO OFF
T
O TURN THE APPLIANCE ON
ON/OFF switch.
PREHEATING THE COFFEE UNIT
1. T
BUTTON AND ATTACH THE FILTER HOLDER TO THE APPLI
ANCE WITHOUT ADDING GROUND COFFEE
2. P
same cup as will be used to prepare the coffee
in order to preheat it.
1
3. W
then immediately press the coffee knob. Run
2
the water off until the OK in-
dicator light goes out, then in-
terrupt delivery by pressing
the coffee button again.
4. E
OK indicator light comes on again
then repeat the same operation. (It
is normal for a small and harmless
puff of steam to be given off when
removing the filter holder).
N
EVER USE THE APPLIANCE WITHOUT WATER IN
and always remember to top up
THE TANK
when the level drops to a couple of cen-
timetres from the bottom.
, press the
on by pressing the ON/OFF
URN THE APPLIANCE
LACE A CUP UNDER THE FILTER HOLDER
OK
AIT FOR THE INDICATOR LIGHT
. Wait until the
MPTY THE CUP
-
.
. Use the
to come on,
5